JAI RM-670, User Manual

Page: 50 / 82

RM-67X Series
50 Appendix
8.3.1 AEC Mode
Function Command String Camera Response
Set AEC Mode
:AEC=[D]<cr> :o<cr>
Set the Auto Exposure Control mode. [D] is the mode
parameter.
0 = Manual.
1 = Auto.
User access to control of the AEC feature is determined by the
SB2 setting. If “AEC=: is received, but SB2=0, the command has
no effect but does not return an error code.
Note: Setting AEC to auto will force the AGC mode (AMD) to
manual.
Get AEC Mode
:AEC?<cr> :oAEC[D]<cr>
Enquire current AEC Mode. [D] is the current mode value.
0 = Manual.
1 = Auto.
User access to control of the AEC feature is determined by the
SB2 setting. The “AEC=?” command returns the current value
regardless of the SB2 value.
8.3.2 AFE Register Address
Function Command String Camera Response
Set AFE Register Address :AFA=[DDD]<cr> :o<cr>
Set the AFE register address where subsequent AFE writes
(AFW) will place the value written. [DDD] is the address value
with a range of 0-255.
Get AFE Register Address
:AFA?<cr> :oAFA[DDD]<cr>
Enquire the current AFE register dddress. [DDD] is the address
value with a range of 0-255.
8.3.3 AFE Write
Function Command String Camera Response
Write a value to AFE Register :AFW=[DDDD]<cr> :o<cr>
Writes a value to an AFE register at the address previously
specified by the AFA command. [DDD] is the address value with
a range of 0-16,777,215.