User Manual (Ver. 1.0) - Main Functions
GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE
- 98 -
ROI Function (Single ROI)
Related Setting Items:
The ROI (region of interest) function allows you to output images by specifying the areas to scan.
Specify the area to scan by specifying width, height, and horizontal/vertical offset values under
ImageFormatControl.
You can increase the frame rate by specifying a lower height, as the number of lines scanned
decreases. The setting ranges for the ROI function's readable area based on the Binning setting
(BinningHorizontal, BinningVertical, FD2x2BinningMode) are as follows.
Notes:
l
The
(Horizontal/Vertical Binning and FD2x2BinningMode) can only be
used for monochrome camera models.
l
When using this function with
, first, set the Width, Height,
OffsetX, and OffsetY settings, and then configure the Image Scaling Mode settings.
l
When using Decimation Mode, the
function can be configurable
but may not operate as expected.
l
Refer to
Functions That Cannot Be Used Together
for usage restrictions.
Width/OffsetX (Pixels)
Width
OffsetX
Binning Mode
Binning OFF
Binning ON (Mono
models only)
*A,B = WidthMax
Width
(pixels)
Horizontal Binning
96 to [(*A) -
OffsetX], step 8
48 to [(*B) - OffsetX],
step 4
A
B
GOX-5105MC-5GE
2472 1236
GOX-8105MC-5GE
2856 1428
GOX-12405MC-5GE
4128 2064
GOX-16205MC-5GE
5328 2664
GOX-20405MC-5GE
4512 2256
GOX-24505MC-5GE
5328 2664
FD2x2BinningMode
Offset X
(pixels)
Horizontal Binning
0 to [(*A) -
Width], step 8
0 to [(*B) - Width], step 4
FD2x2BinningMode
