Go-X Series Rolling Shutter GigE Vision I/F (Preliminary)
40
LUT (Lookup Table)
The LUT function is used to generate a non-linear mapping between signal values captured on the
sensor and those that are output from the camera.
You can specify the output curve using 257 setting points (indexes).
To Use the LUT Function
Configure the settings as follows.
Item
Setting Value /
Selectable Range
Description
LUTMode
LUT
Use LUT.
LUTSelector*
Red, Green, Blue
Select the LUT channel to control.
LUTIndex
0
～
256
Select the LUT index to configure. Indexes represent
the possible pixel values captured on the sensor,
from the lowest value (Index 0) to the highest (Index
256). For example, Index 0 represents a full black
pixel and Index 256 represents a full white pixel.
LUTValue
0
～
4095
Set the LUT output value for the selected index.
*) Color model only.
LUT Value
LUT values range from 0 at the lowest to 4095 at the highest. Linear interpolation is used to
calculate LUT values between the index points.
Related Setting Items
Summary of Contents for GOX-12409C-PGE
Page 72: ...Go X Series Rolling Shutter GigE Vision I F Preliminary 72 Spectral Response GOX 6409MC PGE ...
Page 73: ...Go X Series Rolling Shutter GigE Vision I F Preliminary 73 Spectral Response GOX 12409MC PGE ...
Page 74: ...Go X Series Rolling Shutter GigE Vision I F Preliminary 74 Spectral Response GOX 20409MC PGE ...
Page 75: ...Go X Series Rolling Shutter GigE Vision I F Preliminary 75 Dimensions ...