![background image](http://html.mh-extra.com/html/jai/go-5000m-usb-uv/go-5000m-usb-uv_user-manual_631515027.webp)
GO-5000M-USB-UV User Manual (Ver. 1.1)
Main Functions
- 27 -
Main Functions
This chapter describes the camera's main functions.
Digital IN/OUT Interface
On this camera, the digital IN/OUT capability in the software control tool can assign the necessary
signals needed for the system.
Line Selector
In the Line Selector, the following input and output signals can be assigned.
Line Selector Item
Description
Line 1 Opt 1 Out
Opt 1 output from # 3 of DC In/Trigger 6-Pin on the rear
Line 2 Opt 2 Out
Opt 2 output from #4 of DC In/Trigger 6-Pin on the rear
NAND 0 IN 1
No. 1 input to the first NAND gate
NAND 0 IN 2
No. 2 input to the first NAND gate
NAND 1 IN 1
No. 1 input to the second NAND gate
NAND 1 IN 2
No. 2 input to the second NAND gate
Note:
Select and connect the line source signal against the item selected in the line selector.
Line Source
Line source signal can be selected from the following table to connect it to the line item which is
selected in the line selector.
Line Source Item
Description
Low
Connect Low Level signal to line item selected in Line Selector (Default setting)
High
Connect High Level signal to line item selected in Line Selector
Acquisition Trigger Wait
Connect Acquisition Trigger Wait signal to line item selected in Line Selector
Frame Trigger Wait
Connect Frame Trigger Wait signal to line item selected in Line Selector
Frame Active
Connect Frame Active signal to line item selected in Line Selector
Exposure Active
Connect Exposure Active signal to line item selected in Line Selector
FVAL
Connect FVAL signal to line item selected in Line Selector
Pulse Generator 0 Out
Connect Pulse Generator 0 signal to line item selected in Line Selector