— 37 —
GO-2401M-PGE / GO-2401C-PGE
Within 30% of
adjustment range
■
Color Shading (GO-2401C-PGE only)
R-channel and B-channel properties are adjusted to using the G-channel shading properties as a
reference.
Pre-correction
Post-correction
Caution
Proper correction is not possible under the following conditions.
•
If an area with a brightness level that is more than 30% less than the reference level exists within the
screen
•
If the brightness level is saturated in parts or all of the screen
•
If the area in the screen with the highest brightness level is 300 LSB or less (during 10-bit video
output)
■
To use the shading correction function
Configure the settings as follows.
Item
Setting value
Description
Shading Correction Mode
GO-2401M-PGE:
Flat Shading (fixed)
GO-2401C-PGE:
Flat Shading, Color Shading
Select the shading correction mode.
Shading Mode
User 1, User 2, User 3
Select the user area to which to save the
shading correction value.
Display a white chart under a uniform light, and execute [Perform Shading Calibration].
Note
After shading correction is executed, the shading correction value is automatically saved to the user area selected
in [Shading Mode].
Binning Function
The binning function allows you to combine the signal values of clusters of adjacent pixels on the
sensor to create improved virtual pixels. Using the function results in images with lower pixel resolution
and higher sensitivity.
Common methods of binning include
“
horizontal binning
”
where two horizontally adjacent pixels are
combined, and
“
vertical binning
”
where two vertically adjacent pixels are combined. By combining the
horizontal and vertical methods to create a group of four pixels (2×2 binning), you can create images
with x4 sensitivity.
Note
Binning function cannot be used in video process bypass mode.
