CV-M10
1)
Shutter “OFF”
Use SW1 switch on PK8080 board located inside camera.
Mode Pos.
Shutter off OFF
Pos.
OFF
Pos.
OFF
Pos.
OFF
Note 1
:
Note 2 :
In this “Shutter OFF” condition, the camera can not accept
External Trigger. When you use External Trigger, refer to the
following item 2) for Normal Speed Shutter “ON”, and
set this SW1 to the original factory setting (Pos.
to
OFF, and
to ON).
“Shutter OFF” condition can also be set by SW1 DIP switch
on the rear panel. Refer to the following item 2) for Normal
Speed Shutter "ON"and set Pos.
of SW1 DIP
switch on the rear panel to OFF positions to make shutter
speed 1/60 (EIA) or 1/50 (CCIR) which gives the same
condition as “Shutter OFF”.
Shutter speed at “Shutter OFF”
Interlace [sec.] Non-Interlace [sec.]
EIA 1/60 1/30
CCIR 1/50
1/25
#Random trigger does-not work at this mode.
2)
Normal Speed Shutter “ON”
Use SW1 switch on PK8080 board located inside camera.
Mode
Shutter
Pos.
OFF
Pos.
OFF
Pos.
ON
Pos.
OFF
To select the shutter speed, use SW1 DIP switch on the rear panel.
- 13 -