CMCB-140MCL/CM-140MCL-UV/CMCB-140PMCL
37
10.3.
Specification table(CM-140MCL-UV/CM-140PMCL-UV)
Specifications
CM-140
MCL-UV/CM-140PMCL-UV
Scanning system
Progressive scan
Frame rate full frame
16.14 frames/sec. Progressive
(1052 lines/frame)
Pixel clock
33.75 MHz
Line frequency
16.978 kHz
(1988 pixel clock/line)
CCD sensor
1/2” Monochrome UV sensitive ICX407BLA
Sensing area
6.4 (h) x 4.8 (v) mm
Cell size
4.65 (h) x 4.65(v)
m
Active pixels
1392 (h) x 1040 (v)
Pixels in video output. Full
2/3 partial
1/2 partial
1/4 partial
1/8 partial
1392 (h) x 1040 (v) 16.14 fps. H = 16.978 kHz
1392 (h) x 694 (v) 20.76 fps H= 16.978 kHz
1392(h) x 520(v) 24.16 fps. H = 16.978 kHz
1392 (h) x 269 (v) 32.16 fps. H = 16.978 kHz
1392(h) x 130 (v) 38.41 fps. H = 16.978 kHz
Sensitivity on sensor (minimum)
0.3 Lux (Max. gain, Shutter OFF, 50% video )
S/N ratio
More than 50 dB (0dB gain)
Digital Video output.
8 or 10 bit in Camera Link
Iris video output. Analogue
0.7 Vpp
Gain
Manual -3 to +12 dB
Gamma
1.0
Synchronization
Int. X-tal.
Trigger input. TTL
Camera Link
4 V
2 V. TTL
Via Camera Link
EEN output
4 V from 75
source
Trigger modes
Pre-Select , Pulse Width and Reset continuous
Accumulation
LVAL synchronous or asynchronous automatic selection
Preset Shutter speed
9 fixed steps 1/30 to 1/10,000 second
Programmable exposure
2 L to 1052 L (118
s to 62 ms)
Pulse width control
1 L to 32 frames.
Readout modes
Full, Partial scan.(2/3, 1/2, 1/4, 1/8) V Binning
Control interface
Camera Link serial
Functions controlled by RS 232C
Shutter, Trigger, Scanning, Read out, Polarity, Black level, Gain,
Operating temperature
-5
C to +45
C
Humidity
20 – 90% non-condensing
Storage temp/humidity
-25
C to +60
C/20% to 90% non-condensing
Vibration
10G (20Hz to 200Hz, XYZ)
Shock
70G
Regulatory
CE (EN61000-6-2 and EN61000-6-3), FCC part 15 class B, RoHS, WEEE
Power
12V DC
10%. <0.14A ( Normal Operation )
<0.15A (Max. 1/8 partial operation)
Lens mount
C-mount (Flange back 17.526 mm -0.05mm)
Image centre
0.1mm from C-mount centre
Dimensions
44 x 29 x 66 mm (HxWxD)
Weight
120 g
Note: Above specifications are subject to change without notice
Note: Approximately 30 minutes pre heat requires to meet specifications.