4
INSTRUCTIONS
Unpacking and Start-Up Instructions
1.
Start by removing the included bag of bottle stoppers and drip tray
2.
Remove foam inserts to reveal the machine
3.
Carefully remove the machine by lifting it straight up out of the box
DO NOT HOLD THE SHOTMEISTER BY THE FRONT FAUCET!
4.
Place the machine in desired location with 4 inches of clearance on all sides
5.
REMOVE PAPER PADDING from tap spout and inner chilling chamber
6.
Before plugging in, make sure the power switch in the back is in the
OFF position
7.
Plug in, and flip the switch to ON
8.
Insert drip tray in the lower front side of the machine
Inserting a bottle
1.
It is recommended that you place a pre-chilled bottle into the Shotmeister
2.
Unscrew the bottle cap (picture A) and replace it with a bottle stopper
(picture B) screwing it on tightly
3.
Turn the bottle upside down into the chilling chamber (picture C)
with the bottle stopper engaging the well (picture D)
4.
Bottle is inserted correctly when the Jägermeister begins to drain from
the bottle into the machine
5.
When closing the lid, make sure to PRESS DOWN FIRMLY and ensure
the lid is completely sealed
A
B
C
D
Summary of Contents for SHOTMEISTER
Page 1: ...SHOTMEISTER OWNER S MANUAL...
Page 8: ......
