Jäger Z33-M060.11 K02S1, Manual

Page: 5 / 36

Transport and packaging
Item no. 10200046, Revision 03 5 ( 36 )
2 Transport and packaging
Avoid strong vibrations or impacts during transportation, as these could dam-
age the ball bearings of the HF spindle.
Ü
Any damage reduces the accuracy of the HF spindle.
Ü Any damage restricts the functionality of the HF spindle.
Ü Any damage shortens the service life of the HF spindle.
2.1 Scope of supply of HF spindle
The following parts are supplied with the HF spindle:
q High Frequency Spindle
q Collet
q
Transport packaging
2.1.1 Optional accessories
Available on request:
q Spindle holder
q Frequency converter
q
Felt cleaning taper
q Collet grease
q Further accessories on request.
Only approved accessories have been tested for operational safety and func-
tionality.
Ü Do not use any other accessories – this may invalidate any warranty claims
and compensation claims for damages.
Ü If the spindle holder is to be produced in-house, it is essential to contact
Nakanishi Jaeger GmbH before starting production to request the toler-
ances and production plan for the spindle holder.
2.1.2 Documentation supplied
The documents listed below are supplied with the HF spindle:
q Manual
q The declaration of incorporation is part of the manual.
q
Inspection protocol
Ü Check that the documentation supplied is complete when the spindle is
delivered. If necessary, request a new copy.
2.2 Packaging of HF spindle
All transport packaging materials can be recycled in appropriate disposal facil-
ities.