complete
systems
for
digital
modes
E-Mail:
jäger
computing
&
services
Tel.
+49
(0)
6184
9520018
D-63517 Rodenbach Weidertsweg 8 GERMANY
http://www.jaeger-edv.de
Copyright © 2006-2016 Jäger EDV & Dienstleistungen
- 5 -
Status mail from I-GATE to your own e-mail address displaying a status list containing all data
since the last reset.
Configuration backup with possibility to restore the previous configuration.
Updating on the restart page to update firmware with version information.
MH-list of included stations.
Display of all operating parameters on the status page.
In the I-GATE built-in OLED-display shows in real-time the following data:
Waterfall audio spectrum range 300 baud or 1200 baud, Station call from I-GATE, used firmware
version, name of the connected T2-server, all network data, DHCP on/off-screen, time online
since last reset of the server connection, right to dismiss display tables shown with display
duration in sec, 3 light intensities, Greenwich Mean Time (GMT) in UTC, automatic time
syncronisation by time server, whiteboard to assignment of the bi-color LEDs to soft modem,
KISS, TRX1 on 2m, TRX2 on 70cm, green for “decoded” and red for “send”, power and LAN.
Sum of included and send APRS-packets since the last reset listed separately by intern soft
modem, KISS, TRX1, TRX2, I-GATE and the internet.
Weather station data with pictograms for “fair”, “changeable” and “rain”, input and output of text
messages. The received text messages are displayed below the station call in plain text in the
OLED-display, or displayed in the Browser.
The complete circuit design, the programming of the firmware and the production are
exclusively made in Germany
1. Overview – Overview (Tab 1, as well as tab 14 – tab 19 require no password)
The new, innovative multifunction I-GATE, was created from the previous model LSD-LAN-
DIGI device. Many users have expressed the desire to purchase an I-GATE, which operates
without a PC or additional software. This wish can now be granted in full. During the many
years of development innovative features have been integrated in the I-GATE. The processing
power of the APRS-packets have been significantly improved by modern circuits and tailor-
made special firmware.
2. Comm setup - KISS-interface configuration. (tab 2-13 need a password)
User name (fixed) is “admin”, password default is: “password” (please change)
The n
ecessary configuration settings
for external transceiver or modems are made here.
There are various devices with KISS-interface are assigned under
presets
. Own settings and
tests are possible under “custom”. Please select for the external devices and KISS-interface a
high baud rate but take care for them to match. It is usually not necessary to change the preset
settings.
If you want the traffic in the KISS-mode to be switched off, you only have to remove a kiss-
hook in the matrix and click save.
After each change of configuration click "SAVE" on each page in the lower left part of
the display and then click on "Save permanently and restart”.
If you do not use a KISS-TNC2 interface please read more in point 3.
To guarantee an interference-free operation the TNC2 must be preconfigured on a free
frequency or without audio frequencies – You can use for this Windows Hyper Terminal, UI-
View or Paxton. Each line settings start with “ESC” and the following commands:
