background image

 E - 27200.23101001- 22 February 2017 3:53 PM - Jaga N.V.

Mounting instructions

Knockonwood DBE KNUF

A

Installation must only be carried out by skilled technicians. Incorrect installation could cause the unit to run badly, with a consequent dete-

rioration in performance. Always use personal protective equipment. 

Hydraulic connections

Mark the attachment points on the floor ac-

cording to the mounting holes of the device

 

!

ATTENTION:  when drilling holes do not 

damage hidden pipes and wiring.

The type of floor determines what type of 

screw or plug should be used

Adapter

Drain cock, air vent and valve are tightened 

up in the Jaga factory by hand. While filling 

the installation, control on leaks.

* JAGA Pro-key: Code: 5090.1120

Use the supplied Jaga adapter.

•  a 12V DC supply can be used

•  Consumption at least 1 Watt per unit

•  Install according to the national installation standards.

Control panel 

OK!

Degrease the surface for mounting of the 

Control Panel. Stick the Control Panel, 

press 10 seconds.

Install the control panel with the tape fac-

ing the inside of the room

B1

C1

B2

C2

*

 

B

C

Reviews: