Jaga JRT-100TW, Installation And Operation Manual

Page: 16 / 16

Jaga reserves the right to change product specification at any time in line with our policy of continuous improvement and innovation
Jaga N.V., Verbindingslaan z/n, B-3590 Diepenbeek Tel.: +32 (0)11 29 41 11, Fax: +32 (0)11 32 35 78, info@jaga.be - www.jaga.com -
3 september 2019 12:01 p.m. • Jaga n.v. 8751.050017 - V_07
JAGA ROOM THERMOSTAT JRT-100TW
Installation- and operations manual
Menu Description settings Default
01 Temp. Off set -8 °C - +8°C 0 °C
04 Maximum temperature +5 °C - +35°C 35 °C
05 Minimum temperature +5 °C - +35°C 5 °C
06 Display mode Room / Set / Room Set Room SET
07 Frost protection +10 °C - +20°C 10°
11 Dead Band 0°C > +3°C 1
12 Sensor selection Room / Floor / room fl oor Room fl oor
13 2-pipes/4-pipes select 2/4 2
14 (0-10V) select dead band or not 0: With dead band 1: Without dead band 0
15 Reboot memory Off /LA (last) LA
16 Mode
Heating / Cooling / H Cooling / Auto-change-over ( only
4-pipe )
H cooling
17 Fanspeed 80% - 90% - 100% / Auto mode 100%
18 Maximum fan speed 80%...100% 100%
19 Medium fan speed 45%...75% 65%
20 Low fan speed 20%...40% 40%
21 °C - °F C/F °C
22 Factory reset Re > Hold the [-] button for 3 seconds
23 Software version 1.3
WIFI settings
– scan the QR code for the “SMARTLIFE” APP.
–
download and install the “SMARTLIFE” APP via Google play or the
APP store.
Connect the Thermostat JRT-100TW with the smartphone via WIFI :
– Press the icon in the thermostat screen for ± 3 seconds. The num-
ber“0” appears. Briefly press the “ ” icon in the thermostat screen.:
WIFI will flash at the top left of the screen.
– Press the [+] sign in the Smartlife APP. Select “small household”.
Press the “thermostat symbol” in the APP. Press “confirm”. Log in
to the WIFI network and enter your password. Press “confirm”. De
smartphone will now connect with the thermostat. “1” appears on
the thermostat screen.
– “FCU1” appears on the smartphone screen
–
Assign the thermostat to the desired room, e.g. kitchen, living room,
bedroom... . Press end.
– Restart the thermostat. The thermostat can now be operated with the
Smartlife APP.
Parameter settings
± 3 sec
Switching off the thermostat :
Press briefly To enter the parameter menu,
press the lower left corner of the
screen for 3 seconds, until “01”
appears. Adjust the settings with the “+” or “-“
button.
Scroll through the menu with