OPERATING MANUAL
10-2022
9/9
7.
SAFETY
All installation and operation tasks related to the product shall be only be done by qualified professionals with
sufficient training and experience to assess the current situation and identify and avoid hazards. Failure to follow
this warning or this Operating Manual may cause death, severe bodily injury or substantial property damage.
Fabryka Armatur Jafar S.A. shall not be liable for any accidents or emergencies related to incorrect installation or
operation of the product. Note that the valve installation could be pressurized or contain various type of stray gas
or aggressive liquids. If the installation is operated explosion hazard zones, ATEX requirements may apply; this
will require suitably trained professionals (according to ATEX requirements). Do not use tools which may generate
electrostatic discharge in the ATEX zone.
Do not use the product without thorough knowledge and understanding of this Operating Manual. Follow the
general health and safety rules. Keep this Operating Manual throughout the service life of the product to ensure a
safe operation of the latter.
8.
WARRANTY
The product assembled, installed and operated in compliance with this Operating Manual and the Product
Specification Sheet is covered by a commercial warranty from the manufacturer. The warranty terms, conditions
and period are specified in the Warranty Certificate available from
www.jafar.com.pl
.
The manufacturer may provide this product with custom materials and modifications on order. The final selection
of the product which meets the optimum criteria for the installation project in question is made by the installation
designer, who should consider this Operating Manual along with other data and information of significance for the
correct operation of the product.
Failure to comply with the guidelines and instructions in this Operation and Maintenance Manual releases the
manufacturer from all obligations, liability and warranty. Due to continuous business development, the
manufacturer reserves the right to modify and change the design of the product shown herein.
