Single Lever Kitchen Faucet
BLUE
1 0 9 1 6 1
1 0 9 1 6 1
ROUGHING-IN DIMENSIONS
Plumbers' Putty or Caulking
Adjustable Wrench
Phillips Screwdriver
Channel Locks
TOOLS REQUIRED
Tubing Cutter
Regular Screwdriver
Basin Wrench
Turn off hot and cold water
supplies before beginning.
CAUTION
1
INSTALL FITTING WITH OR WITHOUT ESCUTCHEON PLATE
1
6
9
7
11
12
3
2
8
11
11
10
9
12
13
RED
10" ESCUTCHEON
PLATE KIT
4
6
5
BLUE
RED
7
FERRULE
SUPPLY STOPS
HOT
COLD
PUTTY
1
10
5
8
2
3
4
NOTE: FLEXIBLE SUPPLIES OR BULL-NOSE RISERS MUST BE
PURCHASED SEPARATELY.
Connect the HOT water supply line to FLEXIBLE SUPPLY marked
with a
Red
tag. Connect the COLD water supply line to FLEXIBLE
SUPPLY marked with a
Blue
tag.
2b
WATER SUPPLY CONNECTIONS
2a
INSTALL HOSE AND SPRAY (Model 850/860/...)
Use 1/2" IPS FLEXIBLE SUPPLIES (11) or 3/8" O.D.
BULL-NOSE RISERS (12). Use adjustable wrench to tighten
connections. Do not over tighten. Be careful not to kink
copper supply when bending. Use tubing cutter to cut to
proper length.
2
Apply a bead of putty to the underside lip of SPRAY HOLDER (1).
Place the SPRAY HOLDER (1) into the appropriate mounting hole.
Assemble the RUBBER WASHER (2), BRASS WASHER (3) and
LOCK NUT (4) onto the shank of SPRAY HOLDER (1). From
below tighten LOCK NUT (4) to secure SPRAY HOLDER (1).
Remove RUBBER WASHER (5) and FIBER WASHER (6)
FROM SPRAY HOSE (7). Feed the small end of the
SPRAY HOSE (7) through the SPRAY HOLDER (1).
Install the FIBER WASHER (6) into the COUPLING (9) of
the spray connection on faucet. Tighten with two
wrenches to make a water tight connection.
Install the RUBBER WASHER (5) into the COUPLING (10) for
the HAND SPRAY (8) and hand tighten. Place the HAND
SPRAY (8) into the Spray holder (1).
INSTALL SPRAY HOLDER (Model 850/860/...)
If using the optional ESCUTCHEON PLATE (4) make sure the
O-RING (6) is against the sink and the ESCUTCHEON PLATE
ADAPTER (5) is under the ESCUTCHEON PLATE (4). Use
ESCUTCHEON MOUNTING KIT (7) to secure ESCUTCHEON
PLATE (4) to mounting surface. Mount Faucet (1) onto
ESCUTCHEON PLATE (4) as detailed below.
Install ESCUTCHEON BASE (3) with O-ring over the SUPPLY
ADAPTERS (12), SPRAY HOSE ADAPTER (9) and MOUNTING
STUD (2).
Install the FAUCET (1) into it's mounting hole in the sink counter
top or ESCUTCHEON PLATE (4).
Assemble the two BRASS SCREWS (11) into the RETAINING
WASHER (10).
Assemble SUPPORT PLATE (8) with collar facing down, RETAINING
WASHER (10) and thread LOCKNUT (13) onto SHANK (2) from
underside of sink or countertop.
Align and center FAUCET (1). Tighten LOCKNUT (13) on SHANK (2)
to secure FAUCET (1) to mounting surface.
8-5/8"
12"
5-7/8"
2"
2"
3-7/8"
5-1/4"
2-3/4"
8-7/8"
1-3/4"
1-3/4"
1"
1-1/4"
2-1/4" D.
1/2"NPT
SUPPLIES
NOTE: Bore hole size is 1-3/8"
13
14
With HAND SPRAY seated in faucet body, install WEIGHT (13)
onto HOSE (7) using two SCREWS (14). Locate the WEIGHT
(13) two feet (2') from the underside of the sink deck. Tighten
SCREWS (14) firmly.
