![background image](http://html1.mh-extra.com/html/jado/iq-832-084-series/iq-832-084-series_installation-instructions_3258868002.webp)
Installation Instructions
To ensure that your installation proceeds smoothly--please
read these instructions carefully before you begin.
P r o d u c t s
L u x u r y F a u c e t s a n d A c c e s s o r i e s
1
MOUNT SPOUT ASSEMBLY
Turn off hot and cold water
supplies before beginning.
CAUTION
5
HELPFUL HINTS FOR CLEANING AND MAINTENANCE
The solid brass product you have just purchased has been designed to give you years of beauty and service. It is
important to bring to your attention proper care and maintenance procedures, which will ensure its lasting beauty.
First and foremost, it is important (as it is with any fine piece of jewelry or furniture) that the product be wiped clean and
dry with a soft damp cloth after every use.
Second, under no circumstances should an abrasive cleaner or combination cleaner/polish be used on JADO products.
The abrasive nature of such products will eventually destroy the finish and void the warranty.
In the event of stubborn blemishes shown on the finish, we recommend use of Windex window cleaner with a soft cloth,
but we do not recommend it be used on an everyday basis.
It is important to note that it is normal to expect signs of usage over time.
Thank you for selecting JADO for your home.
ROUGHING-IN
DIMENSIONS
JADO USA
6615 West Boston
Chandler, AZ 85226
Phone:(8OO) 227-2734
Fax: (8OO) 552-JADO(5236)
www.jadousa.com
Product Number
832/O84/...
TO THE PURCHASER OF JADO BRASS PRODUCTS
Attention installer:
Please leave This Pamphlet for The Owner
The state of California has mandated under Proposition #65 that
manufactures of products, including faucets which come into
contact with potable water, must warn the consumer if the product
contains materials listed by the state as a carcinogen or
reproductive toxin. Lead, which is contained in all brass faucets in
limited amounts appears on the State's list.
Preliminary industry tests have indicated that users of faucets
made from brass face no significant danger, however,
California Proposition #65 requires that we provide you with the
following notice:
NOTICE: JADO products conform to industry
requirements of water conservation under the
ASTM / ANSI A112.18.1M-1994 plumbing code.
Lavatory, bidet, wet bar and kitchen faucet sets
have a maximum flow rate of 2.2GPM. Shower
heads, hand showers and body sprays have a
maximum flow rate of 2.5GPM.
Warning: This product contains an element
known to the State of California to cause cancer
of reproductive harm.
JADO BATHROOM AND HARDWARE MFG. CORP.
6615 West Boston
Chandler, AZ 85226
Adjustable Wrench
Channel Locks
TOOLS REQUIRED
Tubing Cutter
NOTE: MOUNTING HOLES
ARE 1-1/4" D.
4
5
6
Install O-RING (2) into SPOUT ESCUTCHEON BASE (3). Insert SPOUT SHANK (1)
through center mounting hole on tub or mounting surface.
Remove the MOUNTING AND TEE ASSEMBLIES (7) from SPOUT SHANK (1).
Figure 1b.
Assemble RUBBER WASHER (4), FIBER WASHER (5) and LOCKNUT (6) onto
threads of SPOUT SHANK (1) from underside of mounting surface. Align SPOUT
and tighten LOCKNUT (6) to secure spout assembly.
Figure 1c.
Note: All deck mounted Roman tub sets must be installed with the
tub spout outlet at least two (2) inches above the flood level rim of
the tub. See Figure 1a.
1
2
3
7
1
Roman Tub Filler with Hand Shower
16
19
10
2
2A
TEE AND HOSE ASSEMBLY
HAND SHOWER ASSEMBLY
Note: Back flow prevention and 2.2 GPM
flow restrictions are included with all
Roman tub sets with hand shower
Push one RING WASHER (1) and one 0-RING (2) onto end of SPOUT SHANK (3).
Slide the TEE (4) onto SPOUT SHANK (3) until it makes contact with the
0-RING (2). Push the other 0-RING (2) and RING WASHER (1) onto the
SPOUT SHANK (3). Make sure both 0-RINGS (2) are seated into
grooves of TEE (4).
Thread LOCK NUT (5) onto SHANK (3). Rotate TEE (4) about
10 degrees from center and tighten LOCK NUT (5) securely.
Insert FIBER WASHERS (6) into COUPLING NUTS (7) of SUPPLY
HOSES (8) and tighten COUPLING NUTS (7).
Thread HOSE ADAPTER (9) onto end of SPOUT SHANK (3) and
tighten.
Install O-RING (12) into recess of SPRAY HOLDER (10).
Drop SPRAY HOLDER (10) into the fourth hole of the
mounting ledge (12" max from SPOUT center). Install
RUBBER WASHER (13), FIBER WASHER (14) and
LOCKNUT (15) from underside of mounting ledge.
Secure SPRAY HOLDER (10) by tightening LOCKNUT (15).
Install SEAL WASHER (16) and connect COUPLING NUT (17)
of BRAIDED HOSE to outlet nipple at the bottom of
BACKFLOW PREVENTER (9). Tighten firmly.
Slip SHOWER HOSE (18) with HOSE NIPPLE (20)
through SPRAY HOLDER (10).
Install SEAL (21) into COUPLING NUT (19). Connect
COUPLING NUT (19) to HOSE NIPPLE (20) and tighten.
INSTALL second SEAL (16) and connect HAND
SHOWER (22) to SPRAY HOSE END (11). Hand tighten.
2
2
1
5
6
6
1
3
4
9
16
21
17
GROOVE
IN TEE
GROOVE IN TEE
BRAIDED
HOSE
10˚
7
7
8
8
FRONT
13
14
15
12
20
18
19
22
11
4
MAKE WATER SUPPLY CONNECTIONS
4A
With HANDLES in OFF position, turn on
WATER SUPPLIES and check all connections
for leaks.
Operate both HANDLES to flush water lines
thoroughly.
Connect HOT water supply to LEFT INLET
UNION (1) and COLD water supply to
RIGHT INLET UNION (2). Pipe connections
are 3/4" NPT. Use sealant or Teflon tape
on pipe connections.
Do not solder directly to valve body.
TEST INSTALLED FAUCET
3/4" X 3/4" NPT UNION
(NOT SUPPLIED)
HOT
COLD
3/4" NPT
3/4" NPT
HAND SHOWER
2
1
Lift HAND SHOWER from HOLDER, direct spray
into tub. Lift TRANSFER KNOB to check HAND
SHOWER and HOSES for leaks.
Turn handles "off" and replace
HAND SHOWER.
IMPORTANT: It is strongly recommended that access be provided
for all enclosed mechanical parts to this system.
TRANSFER KNOB
JADO
JADO
H 9 6 5 5 7 9
H 9 6 5 5 7 9
H 9 6 5 5 7 9
H 9 6 5 5 7 9
POLISHED BRASS AND CUSTOM FINISH WARRANTY
: A 1 YEAR LIMITED FINISH WARRANTY from date of purchase is provided to the
first residential owner against defects in materials and workmanship. Due to the ever-changing finish of Patina products, the finish warranty
is excluded. Warranty shall not include problems related to the installation of the product.
MECHANICS
MECHANICAL WARRANTY:
A LIFETIME LIMITED WARRANTY is provided to the first residential owner on parts to be free from failure
related to defects in materials and workmanship but not installation.
CONDITIONS TO WARRANTIES
JADO Bathroom & Hardware Manufacturing Corp. places the following conditions on its finish and mechanical warranties to the first residential owner only.
JADO finish and mechanical warranties are limited to products correctly installed and used in a residential environment.
JADO warranties will not assume liability for damage due to abuse, mishandling, incorrect installation, improper maintenance, or deterioration
due to normal use.
JADO will not be liable for labor or other costs relating to the sale, installation, or replacement of their products.
In the event of a defect in any JADO product covered by this warranty, the product must be returned to the dealer where originally purchased
along with proof of purchase.
JADO's obligation under the warranty shall be limited to the repair or exchange of any product which has been determined by JADO to be
defective after appropriate examination.
JADO warrants this product to be free from defects in materials or workmanship for as long as the original consumer purchaser
owns their home.
JADO will provide, free of charge, at it’s sole option, replacement part(s) or product (or if no longer available, a comparable
product) to replace those which have proven defective in materials or workmanship.
Proof of purchase (original sales receipt) from the original consumer purchaser must be made available to JADO for all limited
warranty claims. This limited warranty is non transferable. It does not apply in the event of product damage due to the use of other than
genuine JADO replacement parts, installation error, abuse, misuse, or improper care and maintenance (whether performed by
a plumber, contractor, service provider or member of the purchaser’s household). The limited warranty excludes damage due to aggressive
air or water conditions, or harsh or abrasive cleaners and/or materials. This limited warranty excludes all industrial, commercial and business
usage, whose purchasers are hereby extended a two year limited warranty (with the exception of solenoid valves and other electronic
components which carry a one year limited warranty) applying to all other terms of this limited warranty except duration. This limited warranty
does not cover labor charges incurred and/or damages sustained in installation, repair or replacement, nor incidental or consequential
damages, all of which are expressly disclaimed. This limited warranty is applicable only to JADO faucets manufactured after June 1, 1996
and installed in the United States and/or Canada.
This limited warranty gives the original consumer purchaser of an JADO faucet specific legal rights which may vary from state to
state or from province to province. This limited warranty does not cover any liability for consequential or incidental damages, all of which
are hereby expressly disclaimed, or the extension beyond the duration of this limited warranty of any implied limited warranties, including
those of merchantability or fitness for an intended purpose. In some states or provinces the exclusion or limitation of incidental or consequential
damages is not allowed, so those exclusions may not apply to you.
JADO Bathroom & Hardware Manufacturing Corp. provides the following warranties only to the first residential owner of our products.
FINISHES
JADO FAUCET LIFETIME FUNCTION AND FINISH LIMITED WARRANTY
© J A D O U S A 2 0 0 5
4"- 6"
(101mm-
152mm)
4"- 6"
(101mm-
152mm)
1-7/8" MAX.
(48mm)
9"
(228mm)
2-3/8"D.
(60mm)
1-3/8"D.
(35mm)
2-3/8" MAX.
(60mm)
G 3/4"
2" MAX.
(51mm)
12" MAX.
(305mm)
G 3/4"
7-7/8"
(200mm)
5-1/8"
(130mm)
8-1/2"
(216mm)
3/4" NPT
G 3/4"
G 1/2"
Figure 1a
Figure 1b
Figure 1c
DECK MOUNT
BATH
RIM
BATH
RIM
MOUNTING
SURFACE
TWO (2) INCHES
MINIMUM
TUB MOUNT
TWO (2) INCHES
MINIMUM
COLD
11
12
3
INSTALL VALVE BODIES AND HANDLES
10
HOSE CONNECTIONS
Insert VALVE BODY (3) through mounting hole from underside
of tub deck or mounting surface.
Note: Maximum mounting thickness is 1-1/4".
Install O-RING (9) into groove in FLANGE (4).
Thread FLANGE (4) onto VALVE BODY (3) until tight against
stop washer.
Align VALVE BODY (3) as shown and from below tighten
LOCKNUT (5) to secure the VALVE BODY (3) to the
mounting surface.
Install O-RING (13) into under side of HANDLE BASE (2). Turn
VALVES (3) to off position. Align HANDLES (1) as shown or as
desired. Thread HANDLE BASE (2) until tightly seated against
FLANGE (4).
Insert FIBER WASHERS (10) into COUPLING NUTS (11) of SUPPLY
HOSES (12). Tighten COUPLING NUTS (11) to make a water tight
connection.
Important: Loop SUPPLY HOSES (12) as illustrated
so they do not kink if necessary.
1
2
3
HOT
8
4
13
9
5
6
7
JADO
1-1/4'' MAX.
(44mm)
MOUNTING
SURFACE
Unpack valve assemblies and remove HANDLE (1) by unthreading
HANDLE BASE (2) from VALVE BODIES (3). Unthread FLANGES (4)
from VALVE BODIES (3).
Thread LOCKNUT (5) to bottom of VALVE BODY (3). Make sure
SPACER (6), BRASS WASHER (7) and RUBBER WASHER (8) are
installed in that order.
IQ
™
3/4" NPT
Teflon Tape