5) Leveler
6)
HI Lamp
(ON) Indicating parameter item
sounds. (See 5. Function Setting, setting buzz
OK Lamp
(ON) -- Indicating parameter item
sounds.
LOW Lamp
(ON)—Indicating parameter
7) ―
PRESET TARE”
Symbol ― ‖ p
numeric keys.
8) ―
NET”
Net weight
--
Gross weigh
PRESET TARE action is done.
9) ―
STABLE”
Stable indication, Sy
is in stable condition.
10) ―
ACAI”
Symbol ― ‖ points a
recalculated.
11) ―
M+”
Symbol ― ‖ points at
“M+
12)
“UW”
Under entering a kno
entered unit weight is lower than 4/5 of scale
accurate quantity calculations.
13) ―
SMPL”
Under the sample
calculated unit weight is lower than 4/5 of scale division or the quantity of sample is
10 pieces.
14)
“UNIT WEIGHT”
Unit Weight Window
number of weighments.
15)
“TOTAL COUNT”
Total count window
weighing pan, or accumulated piece count
16)
“WEIGHT”
Weight Window--Displays weight of object on weighing pan, or accumulated
weight value.
4-2-2 Keyboard
1)
0 ~9
numeric keys Enters specific values for tare; unit weight and other data
2)
●
key Decimal point
(II)
Indicating parameter item
is selected when setting buzz
sounds. (See 5. Function Setting, setting buzz sounds)
Indicating parameter item
or
is selected when setting
parameter item
is selected when setting buzz
points at
“PRESET TARE”
when Tare value
ht minus Tare. Symbol ― ‖ points at
“NET”
w
ymbol ―
‖ appears at the top of
“STAB
at
“ACAI”
when the average unit weight is
+”
when scale is in accumulation mode.
own unit weight mode, Symbol ― ‖ points
entered unit weight is lower than 4/5 of scale division. Unit weight is too small for ensuring
ple counting mode, Symbol ― ‖ points at
calculated unit weight is lower than 4/5 of scale division or the quantity of sample is
Unit Weight Window --Displays the average unit weight value, or
count window –Displays the calculated number of pieces on the
weighing pan, or accumulated piece count value.
Displays weight of object on weighing pan, or accumulated
numeric keys Enters specific values for tare; unit weight and other data
buzz
is selected when setting buzz
is selected when setting buzz sounds.
entered via
when TARE or
BLE”
when scale
is
calculated
or
s at ―
UW”
when
division. Unit weight is too small for ensuring
at
“SMPL”
when
calculated unit weight is lower than 4/5 of scale division or the quantity of sample is less than
Displays the average unit weight value, or
Displays the calculated number of pieces on the
Displays weight of object on weighing pan, or accumulated
numeric keys Enters specific values for tare; unit weight and other data entries.
