P/N 2411600000 Rev. D 07/2011
Page 7
An accuracy of + /– 15°F is attainable with the JGTS snap action thermostat. The JGTSD and JGTSDS
thermostats will have a maximum accuracy of + /– 19°F.
MAINTENANCE INSTRUCTIONS
Contact the factory, factory representative or a local service company to perform maintenance and
repairs.
For daily cleaning of the hot plate sections, turn burner valves “ON” for 2 to 3 minutes and then turn
“OFF.” Use warm water and mild cleanser.
Griddle plates should be cleaned frequently with an absorbent cloth (a burlap bag is ideal). Food
particles that are stubbornly attached to the griddle surface can be removed with a spatula. The
spatula should be free from nicks or burrs.
DO NOT OVERHEAT GRIDDLE PLATES
It is important to avoid carbonizing of the griddle surface.
Turn the burner valves or thermostats “OFF” at unused portions of the griddle to conserve energy and
costs during slack periods.
Once a month, clean all burners with water and a steel brush ensuring that all burner ports are free of
debris. Clean pilots in the same manner. Once cleaned and dried, re-light pilots and check for
blockage. As frequently as necessary, remove grease tray, empty, and then clean with mild detergent.
SERVICE INTERVALS
The need for service depends on the appliance usage. The chart below outlines the recommended
service intervals.
DAYS PER WEEK
SERVICE INTERVALS
Normal Use
(5 hours/day)
Heavy Use
(12 hours/day)
7
60 Days
30 Days
5 to 6
120 Days
60 Days
1 to 4
180 Days
120 Days
It is strongly suggested that a trained gas appliance service company examine the appliance at least yearly.
