TRU 8 / VideoWin 3 Quick Reference Guide
Page
3
of
9
Calibration File Installation
Calibration files are located on the flash drive inside the TRU8. Once the instrument is
connected to the PC via the USB cable, Windows will display the following dialog confirming it
recognizes that the flash drive is available. In the following example, the drive inside the TRU8
has been assigned to the
D:
drive.
Figure 1 - TRU8 Internal Drive Assignment
To copy the calibration files to your hard disk after launching VideoWin:
Calibration files must be copied prior to using the TRU-IMAGE
TRU8.
!
Note
