Jadak PHOTO RESEARCH A-TAKT V-7HS, User Manual

Page: 31 / 47

Chapter 5
– Software
27
P
UBLIC
M
EMBER
F
UNCTIONS
string prVersionInfo ()
Get SDK version information.
int prOpenLogFile (String FilePath)
Creates SDK level log file and starts logging process.
int prDeviceOpen ()
prDeviceOpen Finds and opens PRI spectral device. Also reads maximum exposure time from detected
instrument.
void prDeviceClose ()
prDeviceClose Closes previously opened PRI spectral device
Int32 prDeviceModel (ref string szModel)
prDeviceModel Gets the model number of the currently opened PRI spectral device
Int32 prDeviceInstCalDue (ref string szDueDate)
Report the date and time when the instrument will be out of calibration.
Int32 prDeviceSerialNumber (ref string szSerialNumber)
prDeviceSerialNumber Gets the serial number of the currently opened PRI spectral device
Int32 prDeviceFirmwareVersion (ref string szFirmwareVersion)
prDeviceFirmwareVersion Gets the firmware version of the currently opened PRI spectral device
Int32 prDeviceUnits (UnitsType units)
Sets returned measurement units to either metric or imperial
Int32 prDeviceSpeed (SpeedMode mode)
Adjusts the device measurement speed by altering the gain for the measurement
Int32 prDeviceObserver (int dataSet)
Set CIE standard observer for subsequent measurements
Int32 prDeviceExposure (int mSecs)
Set exposure time for subsequent measurements.
Int32 prDeviceSmartDark (bool bTurnOn)
Enable/disable mandatory capturing of a dark frame before each measurement. When this feature is
enabled the spectrometer determines if a dark frame is required.
Int32 prDeviceMeasure (ref double brightness, ref double cieX, ref double cieY)
Take luminance measurement
Int32 prDeviceLastMeasurementInfo (ref Int32 pixel, ref Int32 lightDark, ref double
exposure, ref double brightness, ref Int32 cct, ref double temperature)
Get additional information for last luminance or spectral measurement.