HS-1RL
User’s Manual
Page 31
RFID Prefix
Prefix characters are user-definable data characters that can
be sent before scanned data. It’s
possible to enable and set a specific prefix for all scanned RFID data only.
Note:
This RFID Prefix will be separate from any set Barcode prefixes or general prefixes.
RFID Prefixes On/Off
To enable or disable RFID prefixes, scan the appropriate code below.
Default = disabled.
Enable
* Disable
RFID Prefix Block String
Use the command
PRERBLK
in combination with ASCII or hex characters to set the
specific RFID Prefix string. See
for ASCII/hex conversion help.
Note:
Hex characters must be preceded by
\x
to be recognized as hex instead of
ASC
II and it’s not possible to interject a Carriage Return in the middle of the block string.
For instance, if you want the prefix to be
[RFID]
, send:
PRERBLK [RFID].
Default RFID Prefix Block string is:
(R)
Example codes:
*
RFID Prefix Block (R)
RFID Prefix Block [RFID]
