HOT WATER
SUPPLY
COLD WATER
SUPPLY
ANTI-SIPHON VALVE SHOULD
BE A MINIMUM OF 6" ABOVE
RIM OF BATH
6"
ANTI-SIPHON
VALVE
(NOT SUPPLIED)
BATH
RIM
IF SPOUT OPENING IS BELOW
BATH RIM, ANTI-SIPHON VALVE
SHOULD BE INSTALLED.
1" MIN.
1" MINIMUM
CODE REQUIREMENT
HEAD NUT
LOCK NUT
HANDLE
FLANGE
NUT
GASKET
GASKET
NUT
VALVE BODY
COLD
COMPRESSION CONE
NUT
RUBBER
GROMMET
FLAT
SEAT
NUT
1/2"
COPPER
TEE
1/2" O.D.
COPPER ELL
1/2" O.D.
COPPER PIPE
1/2" COPPER
ELL
1/2" O.D.
COPPER
PIPE
VALVE BODY
HOT
ADAPTER
1/2" COPPER
TO 1/2” NPT
FAUCET HANDLE
ASSEMBLY NOT
INCLUDED WITH
FILLSPOUT
SUGGESTED TREVI PLUMBING SCHEME
(Pipe and fittings are not included)
BRASS WASHER
FILL SPOUT
BATH SHELL
RUBBER
WASHER
METAL
WASHER
SET SCREW
1/2" FLEXIBLE
FAUCET
CONNECTOR
(NOT PROVIDED)
NUT
SET SCREW O-RING
FILL SPOUT WASHER
Plumbing Code Requirements
When the Water Rainbow Fill Spout is mounted on the bath and the fill spout opening is less than 1" above the bath
rim, plumbing codes will require the installation of an anti-siphon valve. Locate the anti-siphon valve 6" above the rim
of the bath in a vertical position over a waterproof surface or fixture to allow for any possible water leakage through
the air vent. The valve must be installed with access for service.
Printed in the U.S.A.
©1998 Jacuzzi Whirlpool Bath P250000 A 1/99
Printed on Recycled Paper
Summary of Contents for TREVI
Page 4: ......