Jacuzzi Tara Whirlpool Bath and Soaking Bath B950, Specification Sheet

Page: 2 / 2

Tara™ Whirlpool Bath
Model: B950, 8450
Tara™ Bath
Model: 9191
Installation Notes
Refer to installation instructions included with fi xture before beginning installation.
Please confi rm product availability and specifi cations before commencing with any
installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGE
WITHOUT NOTICE.
Electrical Components and Electrical Specifi cations do not apply to non-jetted baths.
Ordering Information
Product Code:
9191 Tara™ Bath
8450 Tara™ Whirlpool Bath
Right
Hand
B950 Tara™ Whirlpool Bath Left Hand
• Center Drain Location
• Accessories / Hardware:
Trip-Lever Drain Kit #X559
Rotary Trip Kit, 26” Cable: #8730
TheraPro™ Jet Rings Kit: #D095
AccuPro™ Jet Rings Kit (2 required): #P556
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(849) – Oil Rubbed Bronze
Technical Specifi cations
Dimensions
60” L x 60” L x 20-3/4” H
(1524 mm) L x (1524 mm) L x (527 mm) H
Drain/Overfl ow
A: 16” (406 mm) B: 12-3/8” (314 mm)
Cutout
See Illustration Below
Total Weight
B950, 8450: 984 lb (446 kg) / 39 lb/sq. ft. (192 kg/m
2
)
9191: 942 lb (427 kg) / 38 lb/sq. ft. (184 kg/m
2
)
Operating Gallonage
74 U.S. Gal. (280 Liters)
Max. 87 U.S. Gal. (329 Liters)
Product Weight
B950, 8450: 118 lb (54 kg)
9191: 76 lb (34kg)
Skirt Mounting
Optional
Electrical Specifi cations
Models B950, 8450 only
Requires a dedicated GFCI protected separate circuit.
Motor/Pump: 120 VAC, 15 AMP, 60 Hz.
RapidHeat™: 120 VAC, 15 AMP, 60 Hz.
Heater (Optional)
Models B950, 8450 only
Requires a dedicated GFCI protected separate circuit.
RapidHeat™: P/N S750000
- 2" x 4" Stud
27-1/4"
35"
44"
60"
60"
46"
27-1/4"
35"
14" x 4"
Motor
Service
Access
Opt.
Service
Access
© Jacuzzi Whirlpool Bath • 14880 Monte Vista Avenue • Chino • CA • 91710 • www.jacuzzi.com
H
L
2"
SIDE VIEW END VIEW
#FS26 06/07
Product Shown: Tara™ Corner Whirlpool Bath Model: 8450
* Measurements inside unit represent cutout in fl oor to allow for drain/overfl ow.
Minimum Service Access dimensions given.
DRAIN/OVERFLOW
A
B
25-1/2"
(648 mm)
58"
(1473 mm)
45-9/16"
(1157 mm)
58"
(1473 mm)
25-1/2"
(648 mm)
TARA CORNER CUTOUT
Right & Left Hand
Drain
59"
Ref.