Jacuzzi MOOD, Use & Maintenance

Page: 42 / 136

42
Q
Then set the day and time you want the heater to turn on; then select the type of sauna
(there is only one selection for bio sauna models).
20:51
15 /--/--
20:51
15/ 07 /--
20:51
15/07/ 15
20:51
26
20:51
10 :--
20:51
10: 30
20:51 20:51
Q
To finish, set the desired temperature and percentage of humidity (the latter only for
models with bio sauna) ; at the end of programming, the "on" day and time will flash in the
lower right corner of the display (when in stand-by mode).
20:51
---------------
-----------
55°
20:51
---------------
-----------
14%
20:51
26
20:51
15.07
10:30
15.07
10:30
Q
First select the menu relative to weekly programming: a series of numbered boxes will
appear that indicate the days of the week (1=Monday, 2=Tuesday, etc.).
Once the desired day is selected, a screen appears where you can store the number of
daily activations (up to 4 per day of the week).
The maximum period of time that can be assigned to each programme is 12
hours; if this value is selected, there must be a 6 hour pause between activa-
tions. Therefore, if a programme lasts 12 hours, the next one must be set so
that it starts 6 hours later; if you want to shorten this wait time, programme a
shorter duration.
To turn off the function, press the
key for a few seconds (the display of
the day and time will disappear).
The function can also be
turned off by turning on the
sauna in manual mode
Weekly
activation
To select a time of 12 hours, the
maximum time of use must be set
to this value during installation
(see the installation manual)