background image

7

1. Vacuum  Head
2. Nose Cap
3. Filter Bag

4. Cleaner Body
5. Motor Box
6. Charger

Charging Your  Cleaner

A

B

Inserting the Filter Bag

C

Attaching the Vacuum Head

D

E

Attaching the Pool Pole

F

Turning the Cleaner ON & OFF

Maintenance

P20X006
P30X002

P30X022XF

P20X003LIV2

LC099-2SK

 Please respect recycling regulations and help to protect the environment.

Return non-working electrical equipment to a facility appointed by your municipality that properly recycles electrical and electronic equipment. 

Do not dispose them in unsorted waste bins. For items containing removable batteries, remove batteries before disposing of the product.

Environmental Recycling Programs USA

Help protect the environment.

Only use the battery charger supplied with the cleaner.

Cleaning the Filter Bag

• You should remove and clean the Filter Bag following each use (Figure F.1).

• Don’t scrub the bag against itself while rinsing it.

Long Term Storage

• Always clean the Nose Cap and Filter Bag before storing.
• Always store and charge your cleaner in a cool, dry indoor shelter.
• Recharge the cleaner indoors for 4 hours after each month of inactivity.
• Never leave your charger connected to the cleaner for more than 24 hours.

Initial Charge 

4 Hours

Recharging (After Complete Discharge) 

4 Hours

Maximum charging time should not exceed 

24 Hours

End of Life Disposal / Recycling Directive

Specifications

Battery Charger Input................................................................100-240V-50-60Hz, 400mA Maximum

Battery Charger Output........................................................................................................8.4V,       1.A

Battery Technical Data...............................................................7.4V, 2200mAh, 16.28Wh, 2S1P Li-Ion

Water Temperature Range.............................................Maximum 96°F, (35°C) Minimum 40°F, (5°C)
Operation Depth.....................................................Maximum 9.8 ft. (3.0 m), Minimum 10 in. (0.25 m)

Charge Temperature................................................Maximum 100°F, (37.7°C) Minimum 50°F, (10°C)

Summary of Contents for JPV200













Reviews: