30
Selecting the Circulation Pump Filtration Cycle
Press and hold the Jets pump 1 (
) and (
) button at the
same time for 3 seconds to access the circulation pump pro-
gramming.
Once you have entered the circulation pump filtration cycle, con-
tinually press the Warmer (
) or Cooler (
) button to scroll
up through the cycles below.
Then select a cycle and press the Jets pump 1 (
) button to
activate that cycle. Upon pressing the jets pump 1 button the sys-
tem will save your selection, exit the program menu and return
to the main menu.
Note:
After 10 seconds the programming screen will revert
back to the temperature if no buttons are pressed. You cannot
have more than one circulation pump cycle activated at a time.
0 hours of circulation per day
4 hours of circulation per day
8 hours of circulation per day (recommended
factory default setting)
12 hours of circulation per day
16 hours of circulation per day
20 hours of circulation per day
24 hours of circulation per day
Note:
The recommended factory default setting for the JLX
Collection is 8 hours. This setting should not be altered. Running
the circulation pump less than the factory recommended time
might result in issues with water quality maintenance.
Programming the Clearray
(Ultraviolet)
Programming the CLEARRAY System (U) or Corona Dis-
charge Ozone (O3)
(where included)
Press and hold the Jets pump 1 (
) and Cooler (
) button
at the same time for 3 seconds. Scroll pass the circulation pump
programming menus by pressing the Warmer button.
After the last cycle, “C6”, the LED screen will display “U” or “O3”.
If the LED screen is displaying “U” then pressing the Jets pump
1 will change the sanitizing system from “U” to “O3” and exit the
programming menu. If the LED screen is displaying “O3” then
pressing the Jets pump 1 will change the sanitizing system from
“O3” to “U” and exit the programming menu. You will see one of
the two configurations below:
A.
C0, C1, C2, C3, C4, C5, C6, U, 365 (duration countdown
timer)
B.
C0, C1, C2, C3, C4, C5, C6, O3, =
Note:
For the O3 option the “=” disables the duration count-
down timer. If you do not wish to change the option do not
press any buttons and after 10 seconds the display will return
to the main menu.
If the CLEARRAY System has been selected, when the time
allotted has expired (365 days) the display screen will flash
between the water temperature and “blb”. At this time the UV
lamp bulb must be replaced, the quartz tube must be cleaned
and the duration countdown timer needs to be reset.
Resetting the duration countdown timer (CLEARRAY
System only)
Once the duration countdown timer for the CLEARRAY System
has reached zero, you will need to reset it, replace the UV lamp
bulb and clean the quartz tube.
To reset the duration countdown timer:
Press and hold the Jets pump 1 (
) and Cooler (
) button
at the same time for 3 seconds.
Press the Warmer (
) button until the display shows “0”.
If the timer has reached “0”, pressing the Jets pump 1 (
) but-
ton will reset the counter. If the timer is not at “0” pressing the
Jets pump 1 button will not reset it.
Note:
If the spa power is interrupted, the duration countdown
timer is not affected. The number of days remaining is stored in the
memory and will continue to countdown once power is regained.
If the duration countdown timer is not at “0” and you need to reset it:
A.
Press and hold the Jets pump 1 and Cooler buttons at the
same time for 3 seconds.
B.
Press the Warmer button to scroll to “U”.
C.
Press the Jets pump 1 button to switch from “U” to “O3”.
C.
Press and hold the Jets pump 1 and Cooler buttons at the
same time for 3 seconds.
E.
Press the Warmer button to scroll to “O3”.
D.
Press the Jets pump 1 button to switch from “O3” to “U”. The
timer has been reset to 365 days.
1
1
Press
Press
Press
Press
Press
Press
Press
Press
Press
Will reset the timer
to 365 days and exit
the menu
1
Press
Press
Press
Press
Press
Press
Press
Press
Will reset the timer to
365 days and exit the
menu
Press
Press
Press
Press
Press
Press
Press
Press
Will take you
back to “C0”
Will select
“O3” option
and exit menu
Press
1
Press
Press
Press
Press
Press
Press
Press
Press
Will select “03”
option and exit
menu
Press
Will take
you back to
“C0”
Press
1
1
1
Summary of Contents for J-LXK
Page 2: ... Italiano 03 English 23 Français 42 Index ...
Page 22: ......
Page 62: ......
Page 63: ......