73
J-400
15.0 Error/Display Messages
There are a number of unique functions designed into
your Jacuzzi spa to protect it from damage and/or to aid in
troubleshooting. When this occurs the spa will notify you by showing the
screen below, Figure 15.0a. A solid white light indicates that all
operations are normal. A solid red light indicates that immediate attention
is required to clear or fix an error code. Following is a listing of all the
possible messages along with their meanings.
Always insist on
genuine Jacuzzi replacement parts.
Note:
If you tap the display will change to Figure 15.0b. The error
icon will remain on the screen as a reminder. If the error is not taken
care of or fixed, the error display will reappear in 2 hours, Figure 15.0a.
1. Open Flow Switch: (Heater is deactivated. The filter/circulation may
also be deactivated.) The flow switch is open, the circulation pump’s
filter is excessively dirty or an air lock has occurred at the circulation
pump intake. Consult the owner’s manual for additional information.
2. Closed Flow Switch: (Heater is deactivated. The filter/circulation
may also be deactivated.) The flow switch is malfunctioning closed.
Contact your authorized dealer or service organization.
3. Flow Restriction: Heater is disabled, check for dirty filter. Consult the
owner’s manual for additional information.
Note:
Make sure to clean the filter(s) and correct proper water level
before contacting your dealer or service organization.
4. Shorted Hi-limit Temp Sensor: The hi-limit temperature sensor is
not functional. Heater is disabled. This must be repaired only by a
qualified authorized service organization or service technician.
5. Open Hi-limit Temp Sensor: The hi-limit temperature sensor is not
functional. Heater is disabled. This must be repaired only by a
qualified authorized service organization or service technician.
6. Shorted Water Temp Sensor: The temperature sensor is not
functional. Heater is disabled. This must be repaired only by a
qualified authorized service organization or service technician.
7. Open Water Temp Sensor: The temperature sensor is not functional.
Heater is disabled. This must be repaired only by a qualified
authorized service organization or service technician.
Figure 15.0a
Figure 15.0b
The flow switch is open. Heater is
disabled. The circulation pump’s filter is
excessively dirty, or an air lock has
occurred at the circulation pump intake.
Consult the owner’s manual for
additional information.
Flow Error
100
6:45p