Page 93
J-400 Series
1.
bonding the remote and spa
When you first use the remote, it will
need to be bonded to the spa for opera-
tional use. To bond the remote:
Press button D and the Down button,
•
at the same time, for 2 seconds (see
4).
The programming instructions will
•
appear on the LCD Display (Figure A).
You will need to press these keys on
•
the remote unit
, not the topside on the
spa. In the following sequence:
1. Return, up
2. Return, up
3. Return, up
4. Select
After you press the Select button,
•
Figure B will appear on the LCD
Display.
Finally, Figure C will appear once the bonding has finished. To
•
clear the LCD display, press any key on the topside.
2.
main menu
When any key is pressed and the remote awakes it will display the icons
that are selectable. You can use the Navigational Quad Keypad (up,
down, left or right) to navigate through the screens and make selections.
By moving through the icons, they will blink to let you know that if you hit
the Select button you will activate that component or aspects of it.
3.
adjusting the Temperature
When the temperature icon is selected, all other icons on the display
screen will disappear. The only two items shown are the thermometer
icon and the digit temperature in ºC or ºF. Using the Navigational Keypad
you can:
1
2
1
U S B
AUX
1
2
2
iPod
1
2
1
1
2
2
Remote display for spas
with the stereo option
Remote display for spas
without the stereo option
REMOTE CONTROL
CONNECTION
Press the keys below
Return, up
Return, up
Return, up
Select
Figure A
REMOTE CONTROL
CONNECTION
Figure B
REMOTE CONTROL
CONNECTION
Enjoy
Figure C
D
