page 32
refilled. Press the JETS button several times, never leaving the
motor on for more than 5 to 0 seconds at a time. Turn power off
and let the air out by loosening the cap on the diverter valve (J-220
models only) and/or remove the filter. Refer to section 9.2 (page 9).
Make certain you tighten the diverter cap and/or reinstall the filter
before turning on spa power and restarting the pump.
15.3 Poor Jet Action
. Press the JETS button to make certain pump # is on.
2. open all air controls to their full on position (counterclockwise).
3. Check for dirty filter. Clean, if necessary (section 2. page 25).
4. Make sure jets are all the way open (section 0.5 page 23).
15.4 Water is Too Hot
Reduce thermostat setting.
15.5 No Heat
. Check thermostat setting (section 0. page 22).
2. Keep the spa cover in place while heating.
3. Check the settings to see if your spa is in economy filtration/heating
mode (page 25).
Should checking the above steps fail to correct the problem, please call
your dealer so that they may arrange service. We build the best spas in
the industry. Nonetheless, we are always striving to improve the quality
and features of our products.
Your input as a Jacuzzi spa owner is a cherished part of this process. If
you have any comments or suggestions, or if you wish to be informed on
any new products for your spa, please write to us.
CONgRATULATIONS
on your good taste and welcome to the happiest
and most relaxed family in the world!
Summary of Contents for J - 210
