Jacuzzi J - 200 J - 230 Owner'S Manual Download Page 53

Page: 53 / 64

J-200

D. To adjust the selected menu item, press the VOLUME Up (7) or

Down (8) buttons.

E. After the selected menu item(s) has been changed and no other

buttons have been pressed within the 5-second time-out, the unit will

resume to the previous operation.

Contrast

•

: “CONTRAST 5” will be displayed by default. The user now

has 5 seconds to press the VOLUME Up or Down buttons to adjust

from 0 – 10.

Dimmer

•

: The dimmer feature of the display is set to “DIMMER High”

by default. Use the Volume Up or Down buttons to adjust the Dimmer

level between High or Low.

Distant/local:

•

“Distant” is the default setting. User now has 5

seconds to adjust with the VOLUME Up or Down buttons from

“Distant” (a broader range of signals) to “Local” (only strong local

stations). This feature is used to designate the strength of the signals

at which the radio will stop during automatic tuning.

area:

•

“USA” is the default setting. User now has 5 seconds to select

“USA”, “LATIN”, “EUROPE” or “ORIT” by pressing the VOLUME Up or

Down buttons.

note:

“LATIN” and “ORIT” are not used.

interamp on/off:

•

Feature is not used.

Programmable turn-on volume:

•

“VOL PGM 12” is the default

setting. User now has 5 seconds to use the VOLUME Up or Down

buttons to program the turn on volume.

Beep Tone:

•

“ON” is the default setting. User now has 5 seconds to

adjust by pressing the VOLUME Up or Down buttons from “ON” to

“OFF”.

audio/enter button:

Press Audio/Enter to navigate through the

stereo sound functions.

Short press “AUDIO” button to access

the audio menu. User can navigate thru the audio menu items by

pressing the “AUDIO” button repeatedly, or by pressing the Tuning

Up (21) or Tuning Down Button (22). Once the desired menu item

appears on the display, adjust that option by using the Volume Up (7)

or Down button (8) within 5 seconds. The unit will automatically exit

the Audio Menu after five seconds of inactivity.

Summary of Contents for J - 200 J - 230

































































Search results

Summary of Contents for J - 200 J - 230

Reviews:

Related manuals for J - 200 J - 230

Brands by name

Popular brands

Jacuzzi J - 200 J - 230, Owner'S Manual

Search results

Summary of Contents for J - 200 J - 230

Reviews:

Related manuals for J - 200 J - 230

Brands by name

Popular brands