background image

J-100

3.

 

!

 DANGER:

  RISK OF SEVERE INJURY OR DROWNING!

 

Body entrapment:

 May occur when part of the torso becomes 

entrapped, inserted or sucked into a suction or outlet opening. 

•  Never allow children to play or get near the suction fittings, suction 

covers, filter, filter lid or skimmer assembly.

4.

 

!

 DANGER:

  RISK OF SEVERE INJURY OR DROWNING!

 

Evisceration (disembowelment) entrapment:

 May occur when the 

buttocks becomes entrapped, inserted or sucked into a suction or 

outlet opening.

•  Never sit on suction fittings, suction covers, filter, filter lid or skimmer 

assembly.

•  Never allow children to play or get near the suction fittings, suction 

covers, filter, filter lid or skimmer assembly.

5.

 

!

 DANGER:

  RISK OF SEVERE INJURY OR DROWNING!

 

Mechanical entrapment:

 May occur when jewelry, swimsuit, or 

hair accessories become entangled, knotted or snagged in a drain 

suction or skimmer assembly.

•  Never allow your jewelry, swimsuit, or hair accessories to come close 

to the suction fittings, suction covers or skimmer assembly.

•  Never allow children to play or get near the suction fittings, suction 

covers, filter, filter lid or skimmer assembly.

3.2 Hyperthermia

Prolonged immersion in hot water may induce hyperthermia (over-

heating). The use of alcohol or drugs can greatly increase the risk of fatal 

hyperthermia in spas. A description of the causes, symptoms, and effects 

of hyperthermia are as follows.
Hyperthermia occurs when the internal temperature of the body reaches 

a level several degrees above the normal body temperature of 98.6°F 

(37°C). The symptoms of hyperthermia include drowsiness, lethargy 

(fatigue), and an increase in the internal temperature of the body. The 

effects of hyperthermia include:
•  Unawareness of impending hazard;

•  Failure to perceive heat;

•  Failure to recognize the need to exit spa;

•  Physical inability to exit spa;

•  Fetal damage in pregnant women; and

•  Unconsciousness and DANGER of drowning.

A Warning Sign is provided in your warranty packet. Please install at 

a location near your spa, where it is visible to users of the spa. For 

additional or replacement Warning Signs please contact your local 

Jacuzzi dealer and reference item number #6530-082.

7

Summary of Contents for J-100











































Reviews: