background image

Ja

CUZZ

i WH
irl
Pool
 B

at

H

FL61000B

W

arranty

Registration Card

n

inety-

d

ay

Parts 

o

nly

limited W

arranty

o

n

Accessory(ies)

n

inety-

d

ay

Parts 

o

nly

limited W

arranty

o

n

Accessory(ies)

NOTICE:  This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.  There are no warranties 

applicable to Jacuzzi Whirlpool Bath products except as expressly stated herein or as implied by applicable state and federal laws.  The Company will not 

be responsible for any statements or representations made in any form that go beyond, are broader than or are inconsistent with any authorized literature 

or specifications furnished by the Company. 

   Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the 

above limitations and exclusions may not apply to you.

retUrn oF WarrantY CarD

The attached Warranty Registration Card MUST be filled out by the purchaser within thirty (30) days from purchase and received by Jacuzzi Whirlpool Bath 

in order for this warranty to become effective.

resPonsiBilities oF otHers

Inspecting the unit prior to installation is the responsibility of the installer or building contractor who acts on behalf of the user.  They are responsible for 

ensuring the unit is free of defect or damage.  Notices are placed on and in the unit and on the shipping carton advising the installer of this responsibility.  

In the event of a problem, the unit must not be installed. 

the company is not responsible for failures or damage that could have been discovered, 

repaired, or avoided by proper inspection and testing (including proper water testing) prior to installation. 

Damage occurring in transit is the responsibility 

of the carrier.  The user or installer MUST open the crate and inspect the unit for damage when it is delivered.  If damage is discovered, it must be 

reported immediately to the seller and the carrier in writing, and an inspection requested.  Failure of the carrier to respond should be reported to the 

seller and the carrier.  Your freight claims should be filed promptly thereafter.

It is the responsibility of the installer, building contractor, or user to provide access for service.  The Company is not responsible for any costs relating 

to obtaining access for repair.  The user shall bear such costs and, if appropriate, must seek recovery from the installer.

Damage occurring to the unit during installation is the responsibility of the installer and/or building contractor and damage occurring thereafter is the 

responsibility of the user.

Failure of any optional equipment is the sole responsibility of the equipment manufacturer except as provided above and shall not extend to or apply to 

any replacement parts for the Options and accessories.  Any replacement parts shall be covered by the original equipment manufacturer.

The Distributor or Dealer is responsible for knowing local code requirements and notifying the installing contractor and/or user of these requirements 

at the time of purchase.  The Company is not responsible for costs to modify any product to obtain any code approval, such as city, county, or state 

building codes in U.S.A. or municipal or provincial codes in Canada.

WarrantY serViCe

For the customer's benefit, the Company maintains a list of independent service personnel to perform required warranty service repairs.  Such firms are 

not agents or representatives of the Company and cannot bind the Company by words or conduct.

   The Company will provide the warranty service described above when the following conditions have been met: the failure is of the nature or type 

covered by the warranty; the user has informed an Authorized Jacuzzi Whirlpool Bath Service Agent or Warranty Service Department Representative of 

the nature of the problem during the warranty period; conclusive evidence (e.g., proof of purchase or installation) is provided to the foregoing by the user 

proving that the failure occurred or was discovered within the warranty period; an authorized independent service person or Company representative has 

been permitted to inspect the unit during regular business hours within a reasonable time after the problem was reported by the user.

In order to obtain warranty service, contact the nearest Jacuzzi Whirlpool Bath Authorized Service Agent (http://www.jacuzzi.com/trade/bath_product_

support/repairs/) for listing.  Describe the problem and the Authorized Service Agent will inspect the unit and provide the required warranty service. 

If you are unable to contact a Jacuzzi Whirlpool Bath Authorized Service Agent, call or write:

Jacuzzi Whirlpool Bath

Warranty Service Department

14525 Monte Vista Avenue 

Chino, California 91710

Call: 1-(800) 288-4002

To obtain warranty replacement for factory-installed components for Company supplied options and accessories manufactured and 

supplied by the Company, call or write the above.  Provide a description of the problem and proof of purchase.  You will be instructed how 

to obtain replacements and where to return, at your expense, the failed component(s), option(s), or accessory(ies).

All replacement parts, equipment, and repairs shall assume the remaining warranty period of the part(s) replaced.

The Company's warranty obligation shall be discharged upon tender of replacement or repair.  The customer's refusal to accept the 

tender terminates the Company's warranty obligation.

This 

card 

must 

be 
filled 

out 
and 
returned 

to 

the 
address 

printed 

on 
the 
other 

side 

within 

thirty 

(30) 

days 

from 

date 

of 

purchase 

in 

order 

for 
this 
warranty 

to 

be 
come 

ef

fective.                                                                                                       

Purchaser's Name

 _______________________________________________

 

Purchaser's 

Address

 _____________________________________________

 

City
  _________________________________

State

  _______

Zip
 _________

Date of Purchase

 ________________________________________________

 

Model Name

  ___________________________________________________

Serial Number

  __________________________________________________

Dealer's Name

 __________________________________________________

Dealer's 

Address

 ________________________________________________

1.

 

How did you first hear about this Jacuzzi® product?

 
(    ) 

Advertisement      (    ) 

Article in Magazine/Newspaper

 
(    ) V

isited Dealer/Plumbing Supplier      (    ) 

Yellow Pages

 
(    ) Builder/Plumber/Remodeler      (    ) Decorator/Architect

 
(    ) V

isited Retailer/Home Center Store

 
(    ) W

ord of Mouth . . . Friend/Relative/Acquaintance

 
(    ) Other (Please Describe)

 _____________________________________

2.

 

Who 

first 
gave 

you 
specific 

information 

about 

this 
product 

(specifications, 

prices, 

etc.)?

 
(    ) Dealer/Plumbing Supplier      (    ) Builder      (    ) Remodeler

 
(    ) Plumbing Contractor      (    ) Retailer/Home Center Store

 
(    ) Decorator/Architect      (    ) 

Already Installed

3.

 

What was the main reason for purchase?

 
(    ) Styling      (    ) W

arranty Service      (    ) Product Features

 
(    ) Brand Name      (    ) Price      (    ) Hydrotherapy  

 
(    ) Home Resale

 _____________________________________________

 
(    ) Other

  ___________________________________________________

4.

 

Who finally decided which product you would buy?

 
(    ) Self      (    ) Spouse      (    ) Self and Spouse 

Together

 
(    ) Other Family Member      (    ) Designer/Architect

 
(    ) Builder/Plumber/Remodeler      (    ) 

Already Installed

5.

 

Who installed?      (    ) 

Already installed/New Home

 
(    ) Contractor/Plumber when remodeling

 
(    ) Self/Spouse when remodeling

 
(    ) Other

  ___________________________________________________

6.

 

What is the current market value of this property?

 
Please estimate $

 _____________________________________________

7.

 

What is the age of the head of the household?

 __________________

years

8.

 

What other manufacturers did you consider?

 
(    ) Eljer      (    ) Lasco     (    ) Price Pfister      (    ) 

Aqua Glass

 
(    ) 

k

ohler      (    ) 

American Standard      (    ) Sterling

 
(    ) Other (Specify)

 ____________________________________________

9.

 

How long did you shop before purchasing unit?

 
(    ) 1 day

 

(    ) 2 months- 6 months

 
(    ) 2-7 days

 

(    ) 6 months- 1 year

 
(    ) 1 week- 2 weeks

 

(    ) 1 year- 2 years

 
(    ) 2 weeks- 4 weeks

 

(    ) +2 years

 
(    ) 1 month- 2 months

10.
 Approximately how long have you lived in this home?

 _________________

11.

 Please indicate, approximately

, the total annual income of your household.

 
(    ) Up to $24,999                  (    ) $50,000 to $74,999

 
(    ) $25,000 to $29,999          (    ) $75,000 to $99,999

 
(    ) $30,000 to $39,999          (    ) $100,000 to $149,999

 
(    ) $40,000 to $49,999          (    ) $150,000 and 

Above

12.
 W

as your purchase process?

 
(    ) V

ery easy     (    ) Easy      (    ) Difficult      (    ) V

ery Difficult

13.
 How technically aware were you of the patented Jacuzzi® jet system prior to 

your purchase?

 
(    ) Not aware    (    ) Somewhat aware    (    ) V

ery aware

 

Please note that the Registration card may be completed on-line at Jacuzzi.com

Summary of Contents for Finestra FL61000





























Reviews: