FCC Regulations:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
This device has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiated radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-
Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the party responsible
for compliance could void the user‘s authority to operate the equipment.
FCC RF Exposure Information (SAR)
This device is designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal Communications
Commission of the United States.
During SAR testing, this device is set to transmit at its highest certified power level
in all tested frequency bands, and placed in positions that simulate RF exposure in
usage against the head with no separation, and near the body with the separation of
5 mm. Although the SAR is determined at the highest certified power level, the actual
SAR level of the while operating can be well below the maximum value. This is
because the device is designed to operate at multiple power levels so as to use only
the power required to reach the network. In general, the closer you are to a wireless
base station antenna, the lower the power output.
The exposure standard for wireless employs a unit of measurement known as the
Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.
Tests for SAR are conducted using standard operating positions accepted by the FCC
with the device transmitting at its highest certified power level in all tested frequency
bands.
The FCC has granted an Equipment Authorization for this model device with
all reported SAR levels evaluated as in compliance with the FCC RF exposure
guidelines. SAR information on this model device is on file with the FCC and can be
found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on
FCC ID: 2AGCDJACSTD191-B.
For this device, the highest reported SAR value for near the body is 1.19 W/kg.
While there may be differences between the SAR levels of various devices and at
various positions, they all meet the government requirement.
SAR compliance for body operation is based on a separation distance of 5 mm
between the unit and the human body. Carry this device, at least 5 mm away from
your body to ensure RF exposure level compliant or lower to the reported level.
To support body operation, choose the belt clips or holsters, which do not contain
metallic components, to maintain a separation of 5 mm between this and your body.
PTCRB Certified
Detail information refer to https://www.ptcrb.com/certified-devices/device-
details/?model=
xxxxx
Specific Absorption Rate (SAR)
Your mobile device is a radio transmitter and receiver. It is designed not to exceed the
limits for exposure to radio waves recommended by international guidelines. These
guidelines were developed by the independent scientific organization ICNIRP and
include safety margins designed to assure the protection of all persons, regardless of
age and health.
The guidelines use a unit of measurement known as Specific Absorption Rate, or
SAR. The SAR limit for mobile devices is 2 W/kg and the highest SAR value for this
device when tested at the body was 1.458 W/kg* with 5 mm distance.
As SAR is measured utilizing the device’s highest transmitting power, the actual
SAR of this device while operating is typically below that indicated above. This is
due to automatic changes to the power level of the device to ensure it only uses the
minimum power required to communicate with the network.
* The tests are carried out in accordance with EN 62209-2, EN 50566 and EN 62311.
Specification
This radio equipment operates with the following frequency bands and maximum
radio-frequency power.
NOTE:
All JACS Solutions' products are compliant with these power limits required by the
European Union. Frequency bands supported by the product vary by model.
GSM 900: 35 dBm GSM 1800: 32 dBm UMTS BAND 1/8: 25 dBm
LTE BAND 1/3/7/8/20: 25 dBm
ISED Caution
IC: 25646-JACSTD191B
This device complies with Industry Canada’s license-exempt RSSs. Operation is
subject to the following two conditions:
"Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device."
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions
suivantes:
1) l’appareil ne doit pas produire de brouillage;
2) l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d’en compromettre le fonctionnement.
Radiation Exposure Statement:
The product complies with the Canada portable RF exposure limit set forth for an
uncontrolled environment and are safe for intended operation as described in this
manual. The further RF exposure reduction can be achieved if the product can be
kept as far as possible from the user body or set the device to lower output power
if such function is available. Déclaration d'exposition aux radiations: Le produit est
conforme aux limites d'exposition pour les appareils portables RF pour les EtatsUnis
et le Canada établies pour un environnement non contrôlé. Le produit est sûr pour un
fonctionnement tel que décrit dans ce manuel. La réduction aux expositions RF peut
être augmentée si l'appareil peut être conservé aussi loin que possible du corps de
l'utilisateur ou que le dispositif est réglé sur la puissance de sortie la plus faible si une
telle fonction est disponible.
CE Caution
USB Port
This product shall only be connected to a USB interface of version USB 2.0.
Proper Use
As described in this guide, your device can be used only in right location. If possible,
please do not touch the antenna area on your device.
Disposal of Your Old Appliance
1. When this crossed-out wheeled bin symbol is attached to a product, it
means the product is covered by the European Directive 2012/19/EU.
2. All electrical and electronic products should be disposed of separately
from the municipal waste stream via designated collection facilities
appointed by the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential
negative consequences for the environment and human health.
For this product’s recycling information based on WEEE directive, please send an
e-mail to [email protected]
EU DECLARATION OF CONFORMITY
Hereby, JACS Solutions declares that the radio equipment type TD191-B is in
compliance with Directive 2014/53/EU.
Declaration of RoHS Compliance
We declare that TD191-B manufactured by JACS Solutions meets the requirements
of RoHS Directive 2011/65/EU and its amended directive (EU)2015/863.
More information,please send an e-mail to [email protected].
