Jacobsen Turfcat 628 ROPS Cab Manual Download Page 5

 
General Safety 
 

1. Never let an unqualified or untrained driver operate the mower. 
2. Keep a fire extinguisher, with ABC rating securely fastened in the  ROPS. Maintain it and be 
familiar with its use. 
3. Do not carry passengers. 
4.  Never  operate  the  mower  in  a  closed  building  for  a  prolonged  period.  Ensure  adequate 
ventilation is present, as engine exhaust fumes are poisonous and can kill. 
5. Always keep sleeves, jackets or other loose clothing relatively tight and belted. Loose clothing 
may catch on moving parts and result in severe personal injury or death. 
6. Provide a first-aid kit, securely attached inside of the ROPS for use in case of accident. 
7. Never jump from the mower. There is a danger of tripping or falling on protruding parts. 
8.  Use  steps  and  hand  holds  when  mounting  and  dismounting  the  mower,  or  for  servicing 
components too high to reach from the ground. 
9. When seated in the ROPS, fasten seat belt before starting the engine. A proper seat belt must 
be worn at all times when using a ROPS. 
10. Safety devices and shields are intended to protect operators from injury or death. Under no 
circumstances should they be modified, disabled or removed. 

 
 
Operating Safety 

 
1. Always operate the mower controls 

while sitting in the operator’s seat.

 

2. Lock seat in position and buckle seat belt before operating the mower. 
3. Avoid abrupt sharp turns at high speeds. 
4. On sloped terrain, do not make sharp turns as machine stability could be compromised. 
5. Operate the mower smoothly, avoid abrupt starts and stops. 
6. Keep all shields in place when operating the mower. 
7. Do not operate the mower when you are tired, sick, or impaired. 
8. Never operate the mower in confined areas; visibility next to the tractor is reduced. Injury to 
bystanders or damage to the ROPS or equipment may result. 
 
 

Safety 
 

Carefully review the procedures given in this manual and the mower 

operator’s manual with all

 

operators  annually.  It  is  important  that  all  operators  become  familiar  with,  and  follow  safety 
precautions.  Operating  instructions  must  be  given  to  everyone  using  the  tractor  before 
operation  and  at  least  once  yearly  thereafter  in  compliance  with  OSHA  Regulations  1928.57 
(United States). 
 
 
 

     April 2021© Jacobsen Turfcat 628 ROPS Cab Operator Manual

Summary of Contents for Turfcat 628 ROPS Cab

























Reviews: