en-16
3 FITTING INSTRUCTIONS
3.8
MOUNT THE CONTOUR DECK __________________________________________
Older machines that have 16mm bearings in the wing
arms will need to use the bridges supplied in the kit.
1.
Remove the bridge (A) from the deck and
discard with the nuts (B) and screws (C).
2.
Fit new bridge (A) and secure to deck with
new screw (C) and nut (B).
3.
Align deck bridge under lift arms.
4.
Fit spacer (F) to bolt (D).
5.
Fit bolt (D) through bearing in lift arm.
6.
Fit washer (G) and Nut (H) to bolt (D). Lightly lubricate the bolt thread before fitting the nut.
7.
Torque to 205 Nm.
8.
Reconnect the hydraulic hoses.
Repeat above procedure on other wing deck.
NOTE
Make sure the bolts (D) and washer (E) are
fitted before fitting bridge (A) to deck.
H
G
F
E
D
A
B
C
