Jacobsen Kubota V2203-M, Safety & Operation Manual

Page: 14 / 58

3 CONTROLS
14
T5. Hydraulic Oil Temperature
Horn sounds. Hydraulic oil
temperature high.
Stop mower, disengage drives and lower implements. Run engine at low
idle for a few minutes until light goes off. If light remains on, shut off engine
and allow hydraulic system to cool. Remove debris such as leaves and grass
clippings that may be restricting air flow through rear screen on hood and
area between radiator and oil cooler. If engine continues to run hot, return
mower to service area.
CAUTION : Hydraulic system is under pressure. Turn engine off and
allow oil to cool before checking oil level or adding oil to tank.
T6. Hydraulic Charge Oil Filter -
Oil filter warning light comes
on.
Return mower to a service area as soon as possible . Change hydraulic
charge oil filter.
T7. Air Filter - Air filter warning
light comes on.
Return mower to a service area as soon as possible . Change air filter.
T8. Glow Plug - Glow plug light
comes on.
Glow plug switch depressed. Do not energize glow plugs with engine
running.
Alert Action