Installation Instructions:
1. Un-bolt and remove the 2-post ROPS structure from the tractor. Use an over-head hoist to
assist, ROPS is VERY heavy. Un-bolt and remove the front bull bar?
2. Take the left rear bracket and position into place where the left side of the 2-post structure
was located. Note that the vertical tube 3” x 2” is aligned with front of the bracket. Loosely
bolt into place with the four provided M12 x 35 fasteners.
3. Repeat for the right rear bracket.
June 2021© Jacobsen HR6010 ROPS Installation Manual
