Jacobsen HR 9016 Turbo, Safety, Operation And Maintenance Manual

Page: 8 / 70

2 SPECIFICATIONS
7
2 SPECIFICATIONS
2.1 PRODUCT IDENTIFICATION _________________________________________________
70538 H ........................... HR 9016 Turbo, 4 Wheel Drive
70539 .............................. HR 9016 Turbo, 4 Wheel Drive
with ROPS
70540 .............................. HR 9016 Turbo, 4 Wheel Drive
with ROPS EC
70541 H ........................... HR 9016 Turbo, 4 Wheel Drive EC
H
..................................... 70538 and 70541 units must have
either a certified cab or ROPS
installed by the Dealer before the
mower can be registered or put
into service.
Serial Number ................ An identification plate, like the one
shown, listing the serial number, is
attached to the frame of the
mower and is located to the
operator’s right just over the rear
axle.
Always provide the serial number of the unit when
ordering replacement parts or requesting service
information.
2.2 CUTTING UNITS___________________________________________________________
Width
Front Deck ................ 92 in. (233.6 cm)
Side Decks................ 59 in. (149.9 cm)
Number of Blades
Front Deck ................ 5
Side Decks................ 3
Overall Cutting Width ...... 16 ft. (487.7 cm)
Cutting Height................. 1-5.5 in. (2.5 - 14.0 cm)
Blade size ....................... 21 in. (53.3 cm)
Tip speed ........................ 16,500 ft./min. (5029 m/min.)
Tires
Size........................... Ten 11 x 4.00 - 5.0 (4 ply)
Two 13 x 6.50 - 6.0 (4 ply)
Pressure ................... 20-25 psi (1.38-1.73 BAR)
2.3 MOWER _________________________________________________________________
Tires:
Front ........................ 29 x 14 - 15: 12 ply
Rear ......................... 24 x 12 -12: 6 ply
Pressure ................... 20-22 psi (1.38-1.52 BAR)
Battery:
Type .......................... Two Maintenance Free 12 Volt
Batteries
720 CCA @ 0°F (-18°C)
Group ........................ 75
Brakes:
Service ..................... Dynamic braking through traction
circuit.
Parking...................... Mechanical front wheel drum
Hand lever actuated
Turn-assist ................ Mechanical front wheel drum
Two pedal actuation
Speed:
Mow ......................... 0 - 8.5 mph (13.6 kph)
Transport - 2 WD ...... 0-20 mph (32.2 kph)
Reverse - 2WD ......... 0-5.5 mph (8.9 kph)
Reverse - 4 WD ........ 0 - 3 mph (4.8 kph)
Production ...................... 16.5 acres per hour @ 8.5 mph
Hydraulic System:
Capacity.......................... 55 U.S. gal. (208 liters) System
Reservoir ........................ 33 U.S. gal. (125 liters)
Fluid Type ....................... ISO VG 68
Cooling ........................... Hydraulic Oil Cooler
Charge Filter................... 10 micron
Return Line Filter ............ 10 micron
Steering ......................... Hydrostatic power steering
CHARLOTTE, NC
YEAR OF
PRODUCTION:
MADE IN U.S.A.
®
A Textron Company
CHARLOTTE, NC PRODUCT OF U.S.A.
®
A Textron Company
7054001651
xxxx xxxx xxxx
7053801651