Jacobsen Fairway 305 Turbo, Safety, Operating And Maintenance Instructions

Page: 10 / 144

JACOBSEN FAIRWAY 305 Series CG2
SAFETY AND OPERATION & MAINTENANCE MANUAL
en-8
4 SPECIFICATIONS
4.1 ENGINE SPECIFICATION
TYPE: Kubota 34.7KW (46.5HP) @
3000 RPM, 4 cylinder (in line)
Turbo charged Diesel engine, 4
stroke, water cooled, 1498cc
(91.44 cu.in) with 12V electric
start.
Model: V1505-TE
Maximum Speed: 3000 ± 50 RPM (No load)
Idle Speed:
1500 RPM
Oil Sump Capacity:6.4 litres (11.26 Imp.pints)
Fuel:
No. 2-D Diesel fuel (ASTM D975)
4.2 MACHINE SPECIFICATION
Frame construction:Heavy duty formed steel chassis
with box section frame rails.
Cutting unit drive: Fixed displacement hydraulic
motors directly coupled to cutting
unit.
Transmission: Full time 4-wheel drive. Direct
coupled variable displacement
pump to direct coupled 29 cu in
front, 21 cu in rear wheel motors.
Speeds:
Cutting:
0 - 12km/h (0 - 7.5 mph)
FORWARD
Transport: 0 - 14km/h (0 - 8.7mph)
FORWARD
Reverse: 0 - 6.4km/h (0 -4 mph)
Steering: Hydrostatic power steering, with
adjustable tilt steering wheel.
Brakes: Hydrostatic braking with
mechanical type band parking
brakes, 260mm x 45mm (10.25in
x 1.75in) on front wheels.
Fuel Tank
Capacity: 45.4
litres
Hydraulic Tank
Capacity: 37.8
litres
Battery: Exide 093 (SAE 500)
4.3 DIMENSIONS
Width of cut: 2.94 metres (116in)
Overall width: 3.22metres(126.8in)
Overall width: 2.52 metres (99.2in)
(transport)
Overall height:
1.6 metres (63in)
Overall length: 2.75metres (113.4in)
Overall weight of
machine: 1515kg
(4100lb)
4.4 VIBRATION LEVEL
The machine was tested for whole body and hand/
arm vibration levels. The operator was seated in the
normal operating postion with both hands on the
steering mechanism. The engine was running and
the cutting device was rotating with the machine
stationary.
Standard ISO 5349: 1986
Mechanical vibration.
Guidelines for the measurement and the assessment
of human exposure to hand-transmitted vibration.
Standard ISO 2631-1: 1985
Evaluation of human
exposure to whole body vibration -- Part 1: General
requirements.
4.5 SLOPES
DO NOT USE ON SLOPES GREATER THAN 15°
The slope 15° was calculated using static stability
measurements according to the requirements of
EN 836.
Jacobsen Fairway 305
Series CG2
Hand / Arm Acceleration
Level
Max. LH or RH
Accelerations m/s²
Mean Value of X, Y, Z Aeq
0.37 ± 0.40
Jacobsen Fairway 305
Series CG2
Whole Body Acceleration
Level
Max. Seat
Accelerations m/s²
Mean Value of X, Y, Z Aeq
0.65 ± 0.40
Jacobsen Fairway 305
Series CG2
Whole Body Acceleration
Level
Max. LH or RH Foot
Accelerations m/s²
Mean Value of X, Y, Z Aeq
0.45 ± 0.40
TYRE PRESSURE
Product
Front Wheel Rear Wheel
Tyre Size Tyre Type Tyre Pressure Tyre Size Tyre Type Tyre Pressure
Fairway 250,
305, 405
26.5 x 14.50 - 12 Titan Ultra Trac 4pr 1.00 - 1.37 bar 20 x 10.00 - 8 Titan Ultra Trac 4pr 1.00 - 1.37 bar