background image

Technical Manual
Technická příručka

When Performance Matters.

VAROVÁNÍ

Při nesprávném použití tohoto stroje může dojít kvážným úrazům. Pracovníci
obsluhy a údržby tohoto stroje by měli být vyškoleni vjeho řádném používání
a upozorněni na jeho různá nebezpečí. Předtím, než se stroj pokusí zprovoznit,
obsluhovat, seřizovat nebo provádět jeho servis, by si měli přečíst celou příručku.

WARNING

If incorrectly used, this machine can cause severe injury. Those who use
and maintain this machine should be trained in its proper use, warned of its
dangers and should read the entire manual before attempting to set up,
operate, adjust or service the machine

GB

CZ

Czech

Eclipse

InCommand

63300 –  Eclipse 118, 18” 11 Blade Reel, Gen-Set
63313 –  Eclipse 118, 18” 11 Blade Reel, Battery Pack
63301 –  Eclipse 118F, Floating 18” 11 Blade Reel, Gen-Set
63314 –  Eclipse 118F, Floating 18” 11 Blade Reel, Battery Pack
63302 –  Eclipse 122, 22” 11 Blade Reel, Gen-Set
63311 –  Eclipse 122, 22” 11 Blade Reel, Battery Pack
63303 –  Eclipse 122F, Floating 22” 11 Blade Reel, Gen-Set
63312 –  Eclipse 122F, Floating 22” 11 Blade Reel, Battery Pack
63304 –  Eclipse 126, 26” 7 Blade Reel, Gen-Set
63315 –  Eclipse 126, 26” 7 Blade Reel, Battery Pack

63300     Eclipse  118,  457 mm  vřeteno s 11 noži,  generátorová jednotka
63313     Eclipse  118,  457 mm  vřeteno s 11 noži,  akumulátorová jednotka
63301     Eclipse  118F,  plovoucí  457 mm  vřeteno s 11 noži,  generátorová jednotka
63314     Eclipse  118F,  plovoucí  457 mm  vřeteno s 11 noži,  akumulátorová jednotka
63302     Eclipse  122,  559 mm  vřeteno s 11 noži,  generátorová jednotka
63311     Eclipse  122,  559 mm  vřeteno s 11 noži,  akumulátorová jednotka
63303     Eclipse  122F,  plovoucí  559 mm  vřeteno s 11 noži,  generátorová jednotka
63312     Eclipse  122F,  plovoucí  559 mm  vřeteno s 11 noži,  akumulátorová jednotka
63304     Eclipse  126,  660 mm  vřeteno se 7 noži,  generátorová jednotka
63315     Eclipse  126,  660 mm  vřeteno se 7 noži,  akumulátorová jednotka

4170162-CZ-Rev 

B

Summary of Contents for Eclipse InCommand















































































































































Reviews: