Jacobsen 672256G01, Safety, Operation & Maintenance Manual

Page: 56 / 98

8 MAINTENANCE AND LUBRICATION
en-54
8Maintenance and Lubrication
8.1 MAINTENANCE AND LUBRICATION CHARTS __________________________________
Machine Service Interval Chart
Interval Item Section
First 50 hours • Change the Engine oil
• Change the engine oil filter
• Change the Hydraulic Filter Elements 8.7
Each day
10 hours • Check Safety Interlock System
• Check engine oil level
• Check engine coolant Level
• Check air filter service indicator
• Check the Hydraulic Fluid Level
• Check the fuel level
• Check tire Pressure
• Check Engine Bay for Dirt
• Clean radiator screens 6.2
8.6
8.17
8.22
Each week
Every 50 hours • Check for Loose Components
• Check for Hydraulic Leaks
• Check tire air pressures 8.12
8.20
3.1.8
Every 100 hours • Check alternator belt tension
• Clean the fuel filter
Every 200 Hours • Change the engine oil
• Change the engine oil filter
• Check radiator hoses
• Check intake air hoses@
• Check hydraulic hoses and tubes
• Check muffler and exhaust
Every 400 Hours • Change the fuel filter
Every 500 Hours • Change the alternator belt
End of season
Every 1000 hours • Check Battery Condition
• Change the Hydraulic Oil and Filters
• Change the air filter element@ 8.12
8.6
Every 800 Hours • Check valve clearance
Every 1500 Hours • Check injection nozzle pressure@
Every 3000 Hours • Check injection pump
• Check injection timing
Every 2 Years • Change engine coolant
• Change radiator hoses and clamps
• Change fuel hoses and clamps@
• Change intake air hoses@
The items listed above (@ marked) are registered as emission related critical parts by Kubota in the U.S.EPA non
road emission regulation. As the engine owner you are responsible for the performance of the required
maintenance on the engine according to the above instruction. Please see Warranty Statement for detail.
Refer to Engine Manufacturers Manual for the Complete Engine Maintenance Procedures