7
D.
HOW TO OPERATE
Making a call
IP Address
Pick up the handset and press
or
for five seconds, the mode can switch to
on-hook status.
In on-hook mode, press
MUTE
to get the local IP address.
Dial Directly
Set “
Use # to dial immediately
” to Yes (see
C.3 Call setting
).
On-hook status, press the desired number and press
to dial out .
Redial
With the SIP phone is off-hook, press
REDIAL
, the SIP phone will automatically redial
the last number dialled.
Notice:
The system will empty the calling records after reboot the telephone,
Redial function is not available.
Answering calls
Answering a call
1. Pick up the handset to answer a call.
2. When the handset is not on the base, please put the handset back to the base
and then pick up to answer a call.
Mute Function
On line mode, press
MUTE
to stop sending your voice. Press for another time, this
function will be off.
Volume Adjustment
On-hook, please press
to adjust the voice volume.
Off-hook, please press
to adjust the ringer volume.
Hot Line Function
Please choose the “
Use Hotline
” option on “Advanced SIP Settings” (see
C.2 SIP
Settings
) through WEB, input the Hotline Number, then click “OK”. The SIP phone
would automatically dial the hotline number once SIP phone off-hook, can not dial
the other number, but can receive the incoming call normally.
MSG Collect
MSG LED will blink to remind user to collect the unreached message. Pick up the
handset and press
MSG
, the SIP phone will dial out the preset message service
number. MESSAGE LED will turn off once finish collecting the message.
Restore factory settings
Pick up the handset and press
or
for five seconds, the mode can
switch to on-hook status. With SIP phone activated by power and on-hook,
press
5
*
5
#
, the phone will restore factory settings.
IMIP20_04052016.indd 7
04/05/16 10:16
