7
Proper Operation, Care & Maintenance
Before any maintenance or cleaning, disconnect the Power Blade Charger from the AC wall outlet.
JACO products are designed and manufactured to provide years of operation. Take care to use the product
as intended and keep clean for best overall performance.
Most of the surfaces of your JACO product are finished using a durable, antimicrobial powder coat finish. It
is recommended that the surface areas that are in contact with day to day use be cleaned regularly. Always
review the cleaning products that are being used and verify that it is safe to use on the powder coat finish.
In general, a solution or wipe that is no more than 10% bleach, such as most germicidal wipes used in
hospitals, will be acceptable but it is recommended that you consult with JACO Customer Service if you are
not sure it is safe to use.
Your JACO Mobile Cart does not require any scheduled maintenance however it is good practice to clean the
casters and check that the Cart height adjustment is operating correctly at least once a year. Please contact
JACO Customer Service as needed for more information in maintaining your JACO Mobile Carts.
It is recommended that the Power Blade Charger be located in a clean environment free of liquids, dirt and
dust and a max room temperature of 77 deg (25 C). The Power Blade Charger should be reviewed weekly
for proper care and cleaning. The bays should be used only for the charging of the JACO Power Blade
Battery Packs, any other use may cause damage and will void the warranty.
When cleaning the outside of the Cart Controller, Power Blade Battery Pack or
Power Blade Charger, a dry cloth will be effective for removing dust or light dirt.
If needed, a standard hospital grade germicidal wipe can be used. It is
recommended that the wipe contain no more than 10% bleach to prevent
possible damage to the powder coat metal surfaces.
Inspect the inside bays of the Cart Controller and Power Blade Charger as needed or weekly, remove the
Power Blade Battery Packs to inspect the connections. Remove material that may have accidently dropped
into the Power Blade Charger or Cart Controller.
There should be no reason to clean the inside bay area but if required, make sure the Power Blade Charger
unit is unplugged and a damp (not saturated), less than 10% bleach wipe is used, allow ample drying time.
If the inside connectors pins do become dirty, do not insert any
objects into the contacts. Use compressed air to blow out the build-
up ensuring proper contact and operation.
For more information concerning best cleaning practices, contact our support
team at www.jacoinc.com/support, email at [email protected] or call 877-
803-0101.
Summary of Contents for Ultralite Power Blade Hot-Swap 300 Series
Page 1: ...25 0163 Rev 02...
