11
To change the combination:
1)
Enter the active combination (1,2,3,4 if still the default combination)
2)
Press the OK button twice
3)
Enter your new code (can be up to 8 digits)
4)
Press the OK button, you will hear a long beep
Alarm
If the wrong combination is entered four times continuously, an alarm tone will sound and last for I minute. To
silence the alarm, enter correct code + OK.
Low Battery
The lock will indicate three short beeps with light flash when battery power is low. The lock will operate for
approximately 300 times with low battery. Batteries should be changed as soon as possible.
Emergency Power Supply
If the battery fails completely, you can unlocked by using the by-pass cable provided with your locking tablet
holder and a 9V battery (battery not included). Connect the 9V battery to the cable and connect the cable to the
port on the front of the lock.
Forgot your combination?
It is recommended that you record the combinations of you JACO locking tablet holders. If you do forget
the combination, we do offer a rescue code that will allow you to open the lock and reset the combination. You
will need to contact JACO and provide the serial number of the lock which is etched along the side of the front
edge as shown below. Once JACO has this information, we will forward a by-pass code that will open that
particular lock. Each lock will require a different by-pass code.
