Care and Maintenance
Pre-Assembly
Read through all the instructions before beginning assembly. Unpack and identify all the parts.
Place them on a flat, non-abrasive surface. Assembly by two people is recommended.
PLANNING ASSEMBLY
HARDWARE INCLUDED
NOTED:
Hardware not shown
to actual size.
4
Safety Information
Do not completely tighten bolts and nuts until indicated in assembly step.
Though its powder-coated finish is rust-resistant, steel is prone to rust over time with
exposure to the elements. In case of rust or scratches, lightly sand the affected area
and apply touch-up paint. To maintain the finish periodically apply wax with a soft cloth.
Wash frames and cushions with a mild solution of soap and water; rinse thoroughly.
Dry completely and drip-dry cushions. Do not use bleach or solvents.
OBSERVE WEIGHT LIMITS
The recommended weight limits for the following products are listed below:
Chair: 225 lbs
CAUTION:
If you overload your
furniture, injuries can occur.
Ia (8 + 1 spare)
Short Bolt
Ib (8 + 1 spare)
Medium Bolt
Ic (8 + 1 spare)
Long Bolt
Ottoman: 225 lbs
Ie (8 + 1 spare)
Nut
Id (32)
Metal Washer
If (1)
Allen Wrench
Ig (1)
Hex Wrench
Ih (1 spare)
Glass Bumper
Table: 50 lbs
Do not store anything on glass tabletop. Use furniture covers or store
indoors during cold or inclement weather.
