manualshive.com logo in svg

Jackson JP-24BPNSU, Technical Manual, Page: 5 / 63

Share
Download
Jackson JP-24BPNSU Technical Manual Download Page 5

APPROVAL AND PROCUREMENT RECORD

APPROVAL DATA FOR:

TITLE OF MANUAL:

DESCRIPTION, OPERATION, INSTALLATION, AND MAINTENANCE INSTRUCTIONS FOR DISH-

WASHING MACHINE, MODEL JP-24BPNSU

APPROVAL AUTHORITY: 

(LETTER OF APPROVAL FROM PROCURING  ACTIVITY

CONTRACT NO.

NSN

NO. OF UNITS

CID/APL

DLA-400-90-M-1376

7320-01-144-2638

1

432100007

REMARKS:

DATE:

CERTIFICATION:

IT IS HEREBY CERTIFIED THAT THE TECHNICAL MANUAL PROVIDED UNDER CONTRACT NUMBER DLA-

400-90-M-1376 FOR DISHWASHING MACHINE, MODEL JP-24BPNSU, HAS BEEN APPROVED BY THE APPROVAL
DATA SHOWN ABOVE.

                                                                                             
(TITLE OF COMPANY OFFICIAL)

COMPANY’S NAME                                                               

COMPANY’S ADDRESS                                                         

COMPANY’S FSCM                                                               

JP-24BPNSU Technical Manual
7610-002-38-50 Rev. D (11/11/2005)

i

Summary of Contents for JP-24BPNSU
































































Reviews:

No comments