1. Switching Three Blade or Two Blade Pedal Drive
Prop to the Proper
Flex Drive E
Prop.
The patented
Flex Drive
System makes switching from pedal to electric
power quick and easy. The
Flex Drive E
unit installs in the same coupling
slots used by the pedal drive unit.
We recommend upgrading to the
10" Pitch Pedal / 12V P
rop
(marked
with '10 x 10')
for a 12V system or while pedaling
and our
5" Pitch 24V
P
rop
(marked with '9 x 5')
for a 24V system.
5
INSTALL PROPER
FLEX DRIVE
-
E PROP
(B)
(A)
THE RIGHT PROP FOR THE RIGHT
VOLTAGE
FLEX DRIVE E
24V BATTERY
FLEX DRIVE E
12V BATTERY
FLEX DRIVE
(PEDAL DRIVE)
LENGTH
9.25”
10”
PROP MARKING
9 X 5
10 X 10
DESCRIPTION
ONE PROP ROTATION MOVES THE
BOAT FORWARD 5 INCHES
ONE PROP ROTATION MOVES THE BOAT
FORWARD 10 INCHES
MARKING
LOCATION
BEHIND
BLADE
BEHIND
BLADE
9.25”
10”
BEHIND
BLADE
BEHIND
BLADE
9.25”
10”
To replace the pedal drive prop:
(A)
Remove the
2-
blade or
3-
blade pedal prop
using an M3 allen
key. Be
careful as three bladed prop will come apart as it is removed from the
unit.
(B)
Install the proper
Flex Drive E
prop to the hub. See chart
below.
Guide
the prop over the drive shaft, lining up the shear pin to
the mating slot in the hub. Insert screw and tighten, using a M3 allen
key to tighten snugly.
REMOVE 3
-
BLA
DE
OR 2
-
BLADE
PEDAL
DRIVE PROP