Jackson DynaTemp NB, Installation, Operation And Service Manual

Page: 55 / 68

07610-004-29-29-D
48
ITEM QTY DESCRIPTION PART NUMBER
1 1
Vacuum Breaker, 1/2" Brass
04820-003-06-13
2 3
Elbow, 90-Degree 1/2" Street Brass
04730-206-08-00
3 1 Injector, Rinse Manifold 05700-004-26-98
4 1 Adapter 05700-002-29-75
5 2 Tee 04730-002-22-56
6 2
Nipple, 1/2" Close Brass
04730-207-15-00
7 1
Gasket, Rinse Manifold
05330-003-75-91
8 1
Pressure Transducer
05945-004-17-01
9 3
Plug, 1/8" NPT Brass
04730-209-07-37
10 1
Elbow, 90-Degree 1/4" x 1/4"
04730-003-77-83
11 1
Thermistor Probe
06685-004-34-58
12 1
Probe Fitting
05310-924-02-05
13 1
Red Hose, 1/2" x 38"
05700-004-31-81
14 1
Plug, 1/4" Brass
04730-209-01-00
15 2
Nipple, 1/2" x 6" Brass
04730-003-62-38
16 1
Union, 1/2" x 1/2" Brass
04730-003-62-44
17 2
Bushing, Hex, 3/4" to 1/2" Brass
04730-002-56-27
18 1
Bracket, Plumbing
05700-004-34-28
19 1
Solenoid Valve, 3/4"
04810-100-03-18
20 1
Nipple, 1/2" x 3" Brass
04730-004-20-10
21 1
Y-Strainer, 1/2"
04730-217-01-10
22* 1 Harness 05999-004-21-58
When servicing plumbing components, take care not to damage the threads of each individual item Damaged threads can
cause leaks and loss of pressure, which could adversely affect the performance of the DynaTemp machine It is strongly
recommended that teflon thread tape—used in conservative amounts—be applied to threads when joining components
together It is not advised to use thread sealing compounds, sometimes referred to as “pipe dope” Compounds can be
ejected from the threads during the tightening process and become lodged in key components, rendering them useless,
including solenoid valves and pressure gauge isolation ball valves
NOTICE
PARTS
NB PLUMBING
*Part must be ordered separately