2
DO NOT exceed the capacity of the Pipe Hanger Cart.
ONLY roll on a firm, flat smooth surface.
ALWAYS load lower arms before the top arms and unload top arms
before the lower arms.
ALWAYS assemble the Pipe Hanger Cart according to the instructions
section, using only parts provided by Current Tools.
IMPORTANT SAFETY INFORMATION
WARNING
DANGER
CAUTION
WARNING
DANGER
CAUTION
WARNING
DANGER
CAUTION
WARNING
DANGER
CAUTION
SPECIFICATIONS – 5050H PIPE HANGER CART
Weight Capacity
1000 lbs. evenly distributed
Pipe Hanger Size 40 — 6" to 8" hangers
120 — 2" to 4" hangers
ASSEMBLY INSTRUCTIONS
1. From the storage position (see page 4), remove and set aside the two pipe hanger tube
sections. Then, raise one of the upright tubes to the vertical position. Ensure the upper
bolt is resting in the slot at the top of the gusset. All the flat washers should be on the
outside of the gusset. Repeat for the second upright tube. At this point, DO NOT fully
tighten the nuts on the bolts.
GUSSET
SLOT
WASHER
LOWER BOLT
UPRIGHT TUBE
UPPER BOLT
LOCK NUT
