Step 2
*Attach outside backs across the bottom rear of each seat rail with the pre attached velcro
Step 3
*After attaching KD backs as noted in steps 1 &2, attach power transformer (B) to the matching
plug found in the center of the rear mechanism baserail
Step 4
*Loveseat Only: Attach the console back(H) with the hardware provided (I,J & K). Position the
console back over the rear of the console. Align the holes and start all wing nuts before completely
tightening. To prevent damage becareful not to overtighten
After assembly is complete your product should look as seen below.
1
SOFA/LOVESEAT W/CONSOLE /CHAIR
Notes:
Do Not plug either power transformers into a power outlet until your product is completely assembled and in the location
of its intended use
The two USB lights are intended to be used with the USB ports located in the center dropdown table back only. When
not in use we recommend you store them in the magazine pouch or the hidden storage under the arm pads
To help prevent shock and or damage to your product only plug the power transformers into a grounded outlet .
MADE IN CHINA