Jackson Labs RSR GNSS Transcoder, User Manual

Page: 90 / 128

RSR GNSS Transcoder™ User Manual
80 © 2017 Jackson Labs Technologies, Inc.
4.10.34 GPS:DAGR:XFERstate?
This query displays the DAGR / Hot-Start Transfer Status using the values in the following table:
This command only works with an external Rockwell Collins MicroGRAM or RSR Puck.
4.10.35 GPS:DAGR:PVTstate?
This query displays the DAGR pass-through status using the values in the following table:
This command only works with an external Rockwell Collins MicroGRAM or RSR Puck.
4.10.36 GPS:SASTAT:YTRACK?
This query displays the number of satellites being tracked in Y-Code. If the MicroGRAM or RSR
Puck is not keyed, this value should always be 0. The maximum value is 12. This command only
works with an external Rockwell Collins MicroGRAM or RSR Puck.
4.10.37 GPS:SASTAT:CVZStatus?
This query displays the CV Zeroize Status using the values in the following table:
This command only works with an external Rockwell Collins MicroGRAM or RSR Puck.
Value Status
0 None, no transfer initiated
1 In Progress
2 Done
3 Error
Value Status
0 None, DAGR pass-through mode off
1 Initializing
2 Done
3 Error
Value Status
0 Verified
1 Failed
2 None, not attempted